weber dcoe 40 carbs

916roadster · Post by **916roadster** » Thu Mar 25, 2004 9:40 pm

r16: will make a differance in hp and if so how much?

Post by **spl310** » Thu Mar 25, 2004 10:02 pm

Yes, it can increase power. How much depends on what all is done, how well it is jetted, and so forth. You can't beat the "cool" factor of twin Webers, Dellortos or Solex carbs under the hood though!!

Post by **S Allen** » Thu Mar 25, 2004 11:23 pm

Add a cam in the mix to get the real bang for your buck.

American Racing Cams can grind one for you relatively cheaply.

Steve

evta · Post by **evta** » Fri Mar 26, 2004 12:13 am

does anyone know were to get the manifold for the r16?

what is the cost like for one of this manifold?
i know someone getting ride of these carbs and i'm exploring options(they are off a 72 celica).

Minh · Post by **Minh** » Fri Mar 26, 2004 1:09 am

$250 last I checked.

Pierce Manifold makes em. They are online I just don't remeber the website off the top of my head.

DatsunBucky · Post by **DatsunBucky** » Fri Mar 26, 2004 10:45 am

http://www.piercemanifolds.com/Catalogpages/nissan.htm

bottom of the page, last item.

Post by **spl310** » Fri Mar 26, 2004 3:00 pm

The last time that I checked with Pierce, they wanted about $300 for the manifold, linkage and soft mounts. Another company sells the same manifold though:

http://www.jameng.com/prices/index.phtml#99003.830

http://www.webercarburators.com/webercat.pdf

This was discussed on the Roadster Racing forum. You may want to read the posts about it. There could be an issue with the machining:

http://www.risensonracing.com/phpBB2/vi ... .php?t=176

Datsun Roadster Forum-311s.org

weber dcoe 40 carbs

weber dcoe 40 carbs

RE:Webers