Timing chains

doobop101 · Post by **doobop101** » Mon Feb 23, 2004 3:52 pm

I am getting ready to put in my order for the parts needed to replace my timing chain. Will I be making a huge mistake by going with an aftermarket chain compared to OEM for twice the cost?
Do you get what you pay for?
While I am on subject does anyone have an idea what this is going to cost me with someone else doing the labor and me supplying the parts.. My upper chain guide busted and put a hole through my valve cover.

Minh · Post by **Minh** » Mon Feb 23, 2004 6:03 pm

1600 or 2000?

Ldino21 · Post by **Ldino21** » Mon Feb 23, 2004 8:12 pm

The only car that has a chain that can go thru the valve cover is the 2000.

You never know about aftermarket products, talk to the vendors they are the ones who have seen the good and the bad with these parts, talk to them.

http://groups.msn.com/fresnodroc/vendorlinks.msnw

Lou Smaldino
66-1600
67-2000

Minh · Post by **Minh** » Mon Feb 23, 2004 10:44 pm

There are actually two chains you might need to buy. The after market ones "might" not have the proper markings you need to properly allign the chains.

Not mention the chain guides. Those you will have to get from a vendor.

If all the gears (lower, jackshaft, and cam) are not in good conidition those will need to be replaced too. Again you might need a vendor's help to locate that part...

If you have a bottomless wallet you can convert to a serpentine belt system. I have only seen done once.

doobop101 · Post by **doobop101** » Tue Feb 24, 2004 9:57 am

next question then is ....Is there any vendors that I should stay clear from and any that I could trust with thier hands in my shallow pockets
I have only had this little car for about one year so I havent had many dealings yet with any outside vendors than the local auto parts stores.

Post by **S Allen** » Tue Feb 24, 2004 1:11 pm

I believe you can trust anyone of them. I have dealt with them all at one time or another. I think you will find that Dean of Fairlady products tends to have the lower prices. Some people do not like Dean but he has never done me wrong. 2 liter timing parts are not cheap any way you slice it or dice it. Good luck!

Minh · Post by **Minh** » Tue Feb 24, 2004 3:46 pm

Another thing to consider is their location relative to where you live. The farther is has to go sometimes it may cost depending on how it is being shipped.

Datsun Roadster Forum-311s.org

Timing chains

Timing chains

RE:Vendors & Timing Components