New member from MA
Moderators: notoptoy, S Allen, Solex68
- Mainer311
- Roadsteraholic
- Posts: 877
- Joined: Sat Jun 30, 2012 10:30 pm
- Location: Methuen, MA, USA
New member from MA
Hey guys, I just wanted to introduce myself and give a little background.
I'm a 27 year old mechanical engineer in MA who bought a 68 SPL311 number 21773 yesterday from a gentleman up in NH. It seems the car has seen many owners, and the car can be traced back to PA and before that, NJ. The car itself is in fair shape, but certainly needs a lot of restoration work, beginning with the engine/engine bay. The PO had the head rebuilt with new valve seats and guides, but it seems there is a lot of exhaust (read: excessive) coming from the "PCV" on the valve cover. He said there was very low compression on cylinders 1 and 2, so we're all assuming the rings are toast and there is tons of blow-by. I trailered the car to my parent's house in Maine where it is residing in their barn, awaiting the restoration process. The car has a hardtop, which I think is terribly ugly, and a soft top frame which I hope to make use of. The electrical system is in really rough shape, the heater core control cables aren't attached to anything, and there is some body work that needs to be done is virtually every corner of the car. It's currently red, but I've found bits and pieces that are blue and turquoise.
As for myself, I've always been a Nissan owner. I've had a 1993 Nissan Pickup 2wd, 1996 Maxima SE 5 speed, and now a 2008 Frontier 6 speed. I've always dreamed about owning and restoring a 240 or 280Z, until I had discovered a Datsun roadster for sale on a back road in Freeport, ME when I was in high school. I didn't have the 5k at the time for the car, but have always had them in the back of my mind. From what I can gather, I'm sort of one of the younger owners of a 311, as most guys my age are too busy chasing WRX's, BMW's, Hondas, and other vehicles with no character.
Anyways, I gotta get back to scouring this website and soaking up all the information I can before I start the resto on my new 311. Hope to learn a bit from everyone on here.
Edit: can a moderator please move this post to the "introductions" forum? My first post and I've already messed it up.
Cheers,
I'm a 27 year old mechanical engineer in MA who bought a 68 SPL311 number 21773 yesterday from a gentleman up in NH. It seems the car has seen many owners, and the car can be traced back to PA and before that, NJ. The car itself is in fair shape, but certainly needs a lot of restoration work, beginning with the engine/engine bay. The PO had the head rebuilt with new valve seats and guides, but it seems there is a lot of exhaust (read: excessive) coming from the "PCV" on the valve cover. He said there was very low compression on cylinders 1 and 2, so we're all assuming the rings are toast and there is tons of blow-by. I trailered the car to my parent's house in Maine where it is residing in their barn, awaiting the restoration process. The car has a hardtop, which I think is terribly ugly, and a soft top frame which I hope to make use of. The electrical system is in really rough shape, the heater core control cables aren't attached to anything, and there is some body work that needs to be done is virtually every corner of the car. It's currently red, but I've found bits and pieces that are blue and turquoise.
As for myself, I've always been a Nissan owner. I've had a 1993 Nissan Pickup 2wd, 1996 Maxima SE 5 speed, and now a 2008 Frontier 6 speed. I've always dreamed about owning and restoring a 240 or 280Z, until I had discovered a Datsun roadster for sale on a back road in Freeport, ME when I was in high school. I didn't have the 5k at the time for the car, but have always had them in the back of my mind. From what I can gather, I'm sort of one of the younger owners of a 311, as most guys my age are too busy chasing WRX's, BMW's, Hondas, and other vehicles with no character.
Anyways, I gotta get back to scouring this website and soaking up all the information I can before I start the resto on my new 311. Hope to learn a bit from everyone on here.
Edit: can a moderator please move this post to the "introductions" forum? My first post and I've already messed it up.
Cheers,
Jordan
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
- Skyman
- Roadster Fanatic-Site Supporter
- Posts: 2397
- Joined: Thu Dec 15, 2005 6:49 pm
- Location: Salt Lake City, Utah
Re: New member from MA
Welcome, you will find plenty of help and support here. Ask plenty of questions. We are a great family here.
Kyle
Kyle
67.5 SRL311-00060
67.5 SPL311-14241
2004 Porsche 911 Turbo
2003 Ford Powerstroke; Piped & Chipped
67.5 SPL311-14241
2004 Porsche 911 Turbo
2003 Ford Powerstroke; Piped & Chipped
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: New member from MA
Moved and welcome!
Pictures are always welcomed! (OK, required!)
And please post your location in your profile.
We look forward to your posts.
Pictures are always welcomed! (OK, required!)
And please post your location in your profile.
We look forward to your posts.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- dld
- Roadster Fanatic
- Posts: 140
- Joined: Mon Oct 17, 2011 9:32 am
- Location: Tracy, CA
Re: New member from MA
Welcome! This is THE place for us Roadster owners.
David
David
David Layne
1969 SRL311
1979 Yamaha XS650
1977 Yamaha RD400
2004 Hyundai Tiburon GT
2000 Dakota Quad Cab
1969 SRL311
1979 Yamaha XS650
1977 Yamaha RD400
2004 Hyundai Tiburon GT
2000 Dakota Quad Cab
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: New member from MA
Welcome. Please tell me it's not red with a white interior and a big "puke can" on the crankcase vent and a funny looking roof, low top vinyl on a high frame. If so, it's the Roadster from Hell I owned and dumped a few years ago. If you're going to need to rebuild it, you might want to hunt around for an H20 forklift motor.
You do not have the required permissions to view the files attached to this post.
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
- Mainer311
- Roadsteraholic
- Posts: 877
- Joined: Sat Jun 30, 2012 10:30 pm
- Location: Methuen, MA, USA
Re: New member from MA
I'm not sure. You don't remember the car's serial? Looking at the picture, I'm almost positive that's the car. Can you give me some background on it? Is the engine not rebuildable?
It certainly has a white interior, but the top was lost while it was transported from PA to NH. The PO purchased a hardtop for it at a later date, which it has now. No canister or anything on the breather, it's just the tube coming out of the cover.
It certainly has a white interior, but the top was lost while it was transported from PA to NH. The PO purchased a hardtop for it at a later date, which it has now. No canister or anything on the breather, it's just the tube coming out of the cover.
Jordan
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
- only in a datsun
- Roadster Nut
- Posts: 53
- Joined: Tue May 05, 2009 8:59 am
- Location: Mass
Re: New member from MA
Welcome to the site. This is the best site with the best people I have come across. It sure has been extremely helpful for me.
67.5 Roadster
77 280Z Turbo ( the beast! )
86 Porsche 944 Turbo
Suzuki RF900
Ducati M750
etc...
77 280Z Turbo ( the beast! )
86 Porsche 944 Turbo
Suzuki RF900
Ducati M750
etc...
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 9428
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: New member from MA
Gee Dave, great way to get him motivated! Roadster from hell? Aww, she just needs a little attention! I think you had too many girlfriends (other Roadsters) for her to fall in love with you. Nothing is beyond repair...
Welcome Mainer311, as stated this is the place and this is the family. No stupid questions here, so ask away, we'll steer you right...
Welcome Mainer311, as stated this is the place and this is the family. No stupid questions here, so ask away, we'll steer you right...
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
- Mainer311
- Roadsteraholic
- Posts: 877
- Joined: Sat Jun 30, 2012 10:30 pm
- Location: Methuen, MA, USA
Re: New member from MA
Forums love pictures, so here she is:
Ready to be loaded:

About to hit the road:

This is the barn that it's in right now at my parent's house in Maine:

Ready to be loaded:

About to hit the road:

This is the barn that it's in right now at my parent's house in Maine:

Jordan
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: New member from MA
Great pictures, good luck on your progress and getting it on the road soon!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Roman
- Site Supporter
- Posts: 1197
- Joined: Mon Apr 23, 2012 11:41 pm
- Location: Shasta, the lake, in the state of Jefferson!
- Contact:
Re: New member from MA
Hey, what's not to like? looks presentable, and any issues can be fixed.
Will trade guitars for roadsters, food, shelter, clothes, etc, etc.
- spl310
- Roadster Guru
- Posts: 13241
- Joined: Sun Dec 29, 2002 10:38 pm
- Location: In front of this keyboard... in Jacksonville, Florida!
Re: New member from MA
Ignore Dave. It can be made to be a hoot.
"Wow, a Roadster!" Stuart Little
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: New member from MA
one man's Hell is another man's Heaven
Welcome to the forum!
Welcome to the forum!
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- Mainer311
- Roadsteraholic
- Posts: 877
- Joined: Sat Jun 30, 2012 10:30 pm
- Location: Methuen, MA, USA
Re: New member from MA
Okay guys, my first question: On my dash, to the left of the steering wheel, I have my headlight switch on top, and there is a switch missing below it...what is supposed to go there?
Jordan
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
1968 SPL311-21773. Needs paint and some upholstery.
2012 Xterra Pro-4X, 4" lift on 34's, UCA's, pre-runner bumper. Member of the New England Xterra Off-road club.
1971 PL521, Dragon green. Stock L16 w/ 4 speed, lowered 3".
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: New member from MA
Check out the owners manual in the tech wiki: http://www.311s.org/PDFs/OM1968DatsunSportsSML.pdf" onclick="window.open(this.href);return false;, that may help.
I have a low windshield, so not much help here!
I have a low windshield, so not much help here!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG