Need doors and fenders for a 69 roadster

Want ads

Moderators: notoptoy, garth, S Allen

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Need doors and fenders for a 69 roadster

Post by eye » Sun Aug 04, 2019 4:10 pm

Hello everyone

I need doors and fenders for a 69 I am rebuilding. I need good solid rust free fenders mostly. Doors are easier to find but I would take all 4 if someone has them. The car was kinda rough and having to rebuild it from the floors up basically.

In NC and prefer driving to see and pick up. 4-500 miles is OK for me.

Thanks
You do not have the required permissions to view the files attached to this post.

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Re: Need doors and fenders for a 69 roadster

Post by eye » Sun Aug 04, 2019 4:16 pm

Making everything
Last edited by eye on Sun Aug 04, 2019 4:19 pm, edited 1 time in total.

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Re: Need doors and fenders for a 69 roadster

Post by eye » Sun Aug 04, 2019 4:17 pm

making almost everything

User avatar
mraitch
Monthly Subscriber-Roadster Enthusiast
Posts: 3392
Joined: Mon Oct 02, 2006 7:03 pm
Location: Lake Balboa (SFV) - CA
Model: 1500/1600
Year: High Windshield-68-70

Re: Need doors and fenders for a 69 roadster

Post by mraitch » Sun Aug 04, 2019 4:38 pm

"kinda rough" looks generous to me!
Peter Harrison
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California

User avatar
jrusso07
Roadsteraholic
Posts: 1307
Joined: Sat Aug 02, 2008 9:02 am
Location: Penn Yan, NY
Model: 2000
Year: High Windshield-68-70

Re: Need doors and fenders for a 69 roadster

Post by jrusso07 » Wed Aug 07, 2019 7:51 am

I am I. Central NY, so likely out of your travel zone but....

I have two doors, rust free, some dings, dents and scratches

Also have two front fenders from a 70. They have rust thru just below the emblems (no emblems included). Hardball size holes. Lower portion that mount to rockerx is solid. You need to weld over rectanguar marker ights if you want 69 tear drops. Doors and fenders came from same car. PM if interested.
Joe

1969 SRL311 - Solex
1970 SPL311 - U20 mod
1970 SRL311

datsundon
Vendor-Site Supporter
Posts: 34
Joined: Sat Dec 13, 2008 12:27 pm

Re: Need doors and fenders for a 69 roadster

Post by datsundon » Thu Aug 22, 2019 6:41 pm

Hello
I have doors located Bristol Tn 37620 contact datsundon@aol.com

User avatar
andyb
Roadster Fanatic
Posts: 94
Joined: Thu Oct 24, 2013 1:56 pm
Location: El Dorado Hills, CA

Re: Need doors and fenders for a 69 roadster

Post by andyb » Thu Aug 29, 2019 6:14 pm

I see metal fabrication in your future!
been there, done that. it's not too hard, but it is time consuming. if you're planning on sectioning in parts, especially rear fenders, rockers, you may want to search for a better condition donor body... ask me know i know...

Natones
Roadster Fanatic-Site Supporter
Posts: 185
Joined: Fri May 23, 2008 9:05 pm
Location: Albany, NY

Re: Need doors and fenders for a 69 roadster

Post by Natones » Mon Sep 02, 2019 10:10 am

I've got everything you could want/need but I'm in upstate NY... A little more than 4-500 minules.
1969 1600

User avatar
sports imports
Vendor-Site Supporter
Posts: 1059
Joined: Fri Aug 25, 2006 10:41 am
Location: Surrey, BC

Re: Need doors and fenders for a 69 roadster

Post by sports imports » Fri Sep 06, 2019 8:05 am

We make floor pans, front and rear, front fender patch panels, rocker panels, and rocker extension panel( the piece in your picture). Send your email address and I can send you pictures of our repair panels for your 1969 Datsun. All panels are made in house and have been fixing Datsun for 25 years. Floor pans have all original ribbing and fit very well.

Ross Mullen
Sports imports
Ross.sportsimports@gmail.com

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Re: Need doors and fenders for a 69 roadster

Post by eye » Tue Sep 10, 2019 1:01 pm

Floors and rockers are done and fenders have been flared using front flares.

Found some half way decent fenders and doors.

Thanks everybody.

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Re: Need doors and fenders for a 69 roadster

Post by eye » Tue Sep 10, 2019 1:09 pm

IMG_5344s.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
dynaguy
Roadster Fanatic-Site Supporter
Posts: 807
Joined: Wed Jan 01, 2003 3:27 pm
Location: Colton, Wa

Re: Need doors and fenders for a 69 roadster

Post by dynaguy » Tue Sep 10, 2019 6:31 pm

As Artie Johnson would say "Verrrrrrrrry Interesting" should be fun following the progress. serious tires for sure Pat

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Re: Need doors and fenders for a 69 roadster

Post by eye » Wed Sep 11, 2019 9:22 am

While I appreciate original restorations, and have done many, This one was too far gone so I decided to do a "restomod".

SR20 with Borg warner turbo and 5 speed
8.8 Ford rear
Big brakes
All the normal stuff

Unconventional: Fuel cell in trunk, master cyls relocated under dash(Wilwood swing assembly), Battery in firewall where glove box was.
You do not have the required permissions to view the files attached to this post.

eye
Roadster Newby
Posts: 13
Joined: Tue Nov 07, 2017 5:44 pm

Re: Need doors and fenders for a 69 roadster

Post by eye » Wed Sep 11, 2019 9:28 am

Battery compartment is 2 piece. The pic is without the rear enclosed section. Battery comes out the rear.
Curved cutouts in the inner fenders are for the turbo intercooler tubes.
Pedal area is 3/16 plate and gusseted with weldments for pedals on the back side.
You do not have the required permissions to view the files attached to this post.

beebo
Roadster Fanatic
Posts: 150
Joined: Wed Jul 12, 2006 2:10 pm
Location: Austin, TX

Re: Need doors and fenders for a 69 roadster

Post by beebo » Sun Sep 15, 2019 9:44 am

Twins indeed. Lookin' really nice. Would love to follow this build, do you have a build log or thread somewhere?

Cheers,
Wade
:Tosser: 19.9