280zx ignition lock and switch replacement for Roadster

Place to put all stickies after a month.

Moderators: garth, notoptoy, S Allen

User avatar
Mackn367
Site Supporter
Posts: 275
Joined: Tue Mar 27, 2018 3:38 pm
Location: Orange County, CA

280zx ignition lock and switch replacement for Roadster

Post by Mackn367 » Thu Jul 05, 2018 5:28 pm

So I followed the tech wiki on the 67.5 ignition lock / switch replacement and bought the 280zx one I found on Ebay which was a great price. Got the part and the metal bracket that goes around the steering bar was too large in diameter. In doing more research I found out there are actually TWO different sizes. The large size (1 1/2) was too large. I now ordered the smaller size (1 1/4) which I believe is the correct size diameter. Just an FYI if anyone plans to change their entire ignition module to make sure you buy the right size :D :smt006
Nick
1967.5 Datsun Roadster 1600 - Major engine work-in-progress but up and running soon...
Orange County, CA