Can any one direct me to a vendor that can make a replacement ID Plate that's located under the hood? I lost mine during my restoration.
Thanks Bob
Identification plate ID
Moderators: notoptoy, bmccarthy67, S Allen, Solex68
-
bobs19692L
- Roadster Nut
- Posts: 29
- Joined: Sun Nov 15, 2009 11:36 am
- Location: Colorado Springs, CO
- Model: 2000
- Year: High Windshield-68-70
-
bossbob
- Site Supporter
- Posts: 452
- Joined: Thu Aug 24, 2017 3:44 pm
- Location: Central Coast
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Identification plate ID
Dean has them.
https://datsunparts.com/collections/eng ... s-stickers
https://datsunparts.com/collections/eng ... s-stickers
68 Roadster 1600
70 Boss 302
65 K-Code Fastback
69 Mach 1 393 Stroker 5 spd
63.5 Galaxy Conv. 427 Dual Carb, 4 spd
72 Ranchero
65 GT Coupe
70 Boss 302
65 K-Code Fastback
69 Mach 1 393 Stroker 5 spd
63.5 Galaxy Conv. 427 Dual Carb, 4 spd
72 Ranchero
65 GT Coupe
-
bobs19692L
- Roadster Nut
- Posts: 29
- Joined: Sun Nov 15, 2009 11:36 am
- Location: Colorado Springs, CO
- Model: 2000
- Year: High Windshield-68-70
Re: Identification plate ID
Thank youbossbob wrote: ↑Wed Oct 05, 2022 11:10 am Dean has them.
https://datsunparts.com/collections/eng ... s-stickers
-
redroadster
- Roadsteraholic
- Posts: 2044
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Identification plate ID
I would mask off mine and not remove it its pretty important
Note in MO in the 70s if you removed the Vin plate ( YOU-must be a dealership )
Like to put it on a new dash , there was paperwork for the serv.mang to sign off on the tech sign it and was sent to the state vehicle inspector- to sign off on then sent to state license office , and pics taken along the way .
Any other way wasn't good
Note in MO in the 70s if you removed the Vin plate ( YOU-must be a dealership )
Like to put it on a new dash , there was paperwork for the serv.mang to sign off on the tech sign it and was sent to the state vehicle inspector- to sign off on then sent to state license office , and pics taken along the way .
Any other way wasn't good
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
-
datsun1500
- Roadsteraholic
- Posts: 1284
- Joined: Wed Sep 19, 2007 8:24 pm
Re: Identification plate ID
It’s only on the dash on the 69-70. All other years are under the hood, held on by small screws.redroadster wrote: ↑Wed Oct 05, 2022 12:58 pm I would mask off mine and not remove it its pretty important
Note in MO in the 70s if you removed the Vin plate ( YOU-must be a dealership )
Like to put it on a new dash , there was paperwork for the serv.mang to sign off on the tech sign it and was sent to the state vehicle inspector- to sign off on then sent to state license office , and pics taken along the way .
Any other way wasn't good
I remember when no one wanted the 1500s......
-
theunz
- Roadster Nut-Site Supporter
- Posts: 2247
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: Identification plate ID
On the dash, frame, and under the hood on my 69 2000.
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!) 1969 Porsche 911s -worth more, but not as valuable!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!) 1969 Porsche 911s -worth more, but not as valuable!