Tech tips and how to's
Moderators: notoptoy, garth, S Allen
- Roadster Nut
- Posts: 37
- Joined: Mon Aug 10, 2020 6:02 pm
- Location: Vancouver Washington
- Model: 1500/1600
- Year: Low Windshield-64-67.5
So I mounted up the new chain/sprockets/tensioner can you double check that it is correct? There were two dimples on the crank sprocket. I assumed that the one with the white paint is the one to use. The sprocket is clocked with cylinder 1 at TDC.
the oil slinger was on the back side of the sprocket my chiltons book states that it goes there but I don't think that is right. I put in front in the pic
You do not have the required permissions to view the files attached to this post.