Gauge Voltage Regulator Drawings

Tech tips and how to's

Moderators: notoptoy, garth, S Allen

User avatar
Curtis
Site Supporter
Posts: 2575
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA

Gauge Voltage Regulator Drawings

Post by Curtis » Fri Jun 28, 2019 12:27 pm

66 stroker
67 basket case, the renewal has begun.

User avatar
Linusrp
Monthly Subscriber-Roadster Enthusiast
Posts: 258
Joined: Fri Aug 29, 2003 6:22 pm
Location: Heartland of America- Kansas

Re: Gauge Voltage Regulator Drawings

Post by Linusrp » Fri Jun 28, 2019 4:11 pm

Crazy well done Curtis. Thanks for the effort.
1967 1600 restored
1968 1600 Gone & Buried
1970 1600 Gone & Buried

User avatar
Curtis
Site Supporter
Posts: 2575
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA

Re: Gauge Voltage Regulator Drawings

Post by Curtis » Fri Jun 28, 2019 4:52 pm

Linusrp wrote:
Fri Jun 28, 2019 4:11 pm
Crazy well done Curtis. Thanks for the effort.
Thanks, you're welcome. There's just too many people suffering through this problem.

We need a write up on how to troubleshoot this.

To me the first place to start is with a volt meter at the gvr. Do you have 12v in and about 8v out? After that work your way down the system.
66 stroker
67 basket case, the renewal has begun.

C.Costine
Roadster Nut-Site Supporter
Posts: 1080
Joined: Fri Feb 13, 2015 8:08 pm

Re: Gauge Voltage Regulator Drawings

Post by C.Costine » Sat Jun 29, 2019 7:23 am

Thanks Cutis, I tested mine and found in and out to be the same. Then I found a spare in my parts stash which tested out good. Do you have a tip on how to print these out so that they will fit on one sheet of paper yet the print is still readable?
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn

User avatar
Curtis
Site Supporter
Posts: 2575
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA

Re: Gauge Voltage Regulator Drawings

Post by Curtis » Sat Jun 29, 2019 9:56 am

They're not meant for small paper. If your printer can tile them then you can tape them together. Any place that has a plotter can print them.

I have a plotter and can print them and fold them up and mail them.
66 stroker
67 basket case, the renewal has begun.

User avatar
Curtis
Site Supporter
Posts: 2575
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA

Re: Gauge Voltage Regulator Drawings

Post by Curtis » Sat Jun 29, 2019 9:59 am

66 stroker
67 basket case, the renewal has begun.