Current Prices for Cylinder Sleeving at Apple Hydraulics...listed

Tech tips and how to's

Moderators: notoptoy, S Allen, Solex68, bmccarthy67

DAC21
Roadster Fanatic-Site Supporter
Posts: 524
Joined: Tue Sep 15, 2020 7:44 am
Location: California
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Current Prices for Cylinder Sleeving at Apple Hydraulics...listed

Post by DAC21 »

spl310 wrote: Thu Jul 22, 2021 8:54 pm No, not the whole cylinder, just the piston inside. My cylinders have been sleeved, but a PO crushed the pin that the pads slide onto.
I believe those are difficult to come by as NOS. You might have to buy used cylinders to pull the Pistons.
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate
DAC21
Roadster Fanatic-Site Supporter
Posts: 524
Joined: Tue Sep 15, 2020 7:44 am
Location: California
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Current Prices for Cylinder Sleeving at Apple Hydraulics...listed

Post by DAC21 »

DivinDave wrote: Thu Jul 22, 2021 9:13 pm White post had all the kits and seals for both the fronts and rears. when I dropped off the fronts I was looking to just get them sleeved, but a whole finished piston was just another ten bucks, they fully assembled and pressure tested them too.
White Post just got back to me, looks like they won't do sleeving only as they need the piston / seals to do a pressure test (which they already have?) When I told them I already had my rebuild kits they requested I send them as well as the cylinders. But it appears they do not give you any credit by supplying the kits as the rear wheel cylinders were still $85, what they charged you for full rebuild with them supplying the new parts. That's kind of screwed up. Looks like I will be going with Apple, maybe Karp's for sleeving only when the time comes. They must be a bit more confident in their process since they will do sleeving only. Whether they do a pressure test by some means, who knows?

Prices ( I supply the rebuild kits)

Rear 13/16" Brake wheel cylinders $85 ea.
3/4 inch single stage Brake Master Cylinder $225
5/8 Clutch Master cylinder $225
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate
jayedeluxe
Roadster Nut
Posts: 48
Joined: Sun Apr 12, 2020 3:50 pm
Location: san diego
Model: 2000
Year: High Windshield-68-70

Re: Current Prices for Cylinder Sleeving at Apple Hydraulics...listed

Post by jayedeluxe »

I didn't know there was an inner piston and an outer piston. They look the same to me, and now I can't tell them apart. Will this be an issue ?
User avatar
spl310
Roadster Guru
Posts: 12485
Joined: Sun Dec 29, 2002 10:38 pm
Location: In front of this keyboard... in Jacksonville, Florida!

Re: Current Prices for Cylinder Sleeving at Apple Hydraulics...listed

Post by spl310 »

Look at the drilling for the crossover lines. It will make sense
"Wow, a Roadster!" Stuart Little

1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2000 Durango
1995 F350 Powerstroke!
More...
DAC21
Roadster Fanatic-Site Supporter
Posts: 524
Joined: Tue Sep 15, 2020 7:44 am
Location: California
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Current Prices for Cylinder Sleeving at Apple Hydraulics...listed

Post by DAC21 »

jayedeluxe wrote: Thu Aug 12, 2021 3:18 pm I didn't know there was an inner piston and an outer piston. They look the same to me, and now I can't tell them apart. Will this be an issue ?
The Cylinder with the bleeder screw is the inner, outer has no bleeder.
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate