Mikuni throttle linkage setup

Tech tips and how to's

Moderators: notoptoy, garth, S Allen

Roadster Newby
Posts: 6
Joined: Wed Dec 19, 2018 5:57 pm

Mikuni throttle linkage setup

Post by DatsunNissanFan »

I sort of put together my Mikuni setup with a manifold/linkage setup meant for 510s with the L style throttle cable linkage. I had to pull that off, then tapped the hole that was there on the rod to place my throttle cable clamp from my previous SU carb linkage. Then, the cable stop had to be again tapped into the manifold center area where it was solid and secured...I couldn’t find a set of manifold meant for this. Anyone know where to get a manifold with the throttle linkage setup meant for our cars? I think this will work fine too but I’m a bit OCD about it. Any comments or inputs would be appreciated!
You do not have the required permissions to view the files attached to this post.

User avatar
Roadster Fanatic-Site Supporter
Posts: 3054
Joined: Mon Apr 16, 2007 8:07 pm
Location: Adelaide, South Australia
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Mikuni throttle linkage setup

Post by Nissanman »

It is CDO not OCD.
The letters are in alphabetical order LIKE THEY SHOULD BE :roll: :lol: :roll: :lol:
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
He's on the road again!

User avatar
Posts: 4895
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: Mikuni throttle linkage setup

Post by fj20spl311 »

That's a 510 motor.
Not very likely you will find a manifold / linkage for a roadster.
Looks like you did a fine job.
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB