Copyright (c) 2001-2008 www.311s.org
All Rights Reserved.
Reproduction of material presented here is strictly prohibited without written permission.
| Part Description | P/N |
| R16 stroker crank | 12200-E0700 |
| U20 connecting rods | 12100-25510 |
| Tri-metal con-rod bearings | 12111-25510 |
| U20 B camshaft 280 degree .45 lift | 13001-2550 |
| U20 rockers (standard OEM) | 13257-255502 |
| Valve spring set (both R16 and U20) | 99996-B1061 |
| U20 Head bolts (stronger than OEM) | 99996-U20HB |
| 7.5 Qt finned aluminum oil pan | 11110-25500 |
| "special" oil pan gasket | 99996-C1135 |
| Trap door oil pan windage tray (expensive and very rare) | 99996-C1133 |
| Roller bearing pilot bushing (R16 and U20) | 32202-09500 |
| 11lb aluminum flywheel. (Specify R16 or U20) revs fast! | 99996-C1012 |
| 650Kg clutch pressure plate (works with R16) | 30210-20111 |
| non-pucked race disk (can be used on street. NLA??) | 30100-RN410 |
| Pucked race disk | 99996-D3040 |
| Aluminum shift lever bushing (cool better than OEM) | 99996-C3030 |
| 3rd gear countershaft for mid close box (27 tooth) | 32216-25500 |
| 2nd gear countershaft for mid close box (28 tooth) | 32250-25500 |
| 3rd gear countershaft for mid close box (28 tooth) | 32260-25500 |
| 19/22 tooth countershaft for ultra close box | 32212-25502 |
| 3rd gear countershaft for ultra close box (27 tooth) | 32216-25502 |
| 3rd gear (27 tooth) (I'm not sure if it's a gear or countersft) | 32260-25502 |
| Performance brake pad set (front) | 99996-J7001M |
| "Green stuff" rear shoe (fore) | 44060-14600 |
| "Green Stuff" rear shoe (aft) | 44070-14600 |
| 11/16" rear wheel cylinder (ajust brake bias by swapping) | 44100-16505 |
| 3/4" rear wheel cylinder | 44100-25500 |
| 13/16" rear wheel cylinder | 44100-14600 |
| Braided stainless steel brake lines (ALL) | 46200-22050 |
| Front competition springs (lowers car 1.75") | 54010-25510E |
| Bump stop front (If these are pre cut they are rare) | 54054-25510 |
| Bump stop Rear | 55240-25510 |
| Rear polyurethane bushing set | 99996-C5000 |
| KONI adjustable front shock | 99996-1750A |
| KONI adjustable rear shock | 99996-17510 |
| Front Anti-sway bar 7/8" | 99996-C4300 |
| Rear anti-sway bar 5/8"(buy only if you have a severe case of understeer otherwise it creates severe oversteer) | 99996-C4531 |
| Polyurethane bushing kit for front anti-sway bar | 99996-C4500 |