Datsun Roadster Forum-311s.org

Do I just use 7/16-20 Mag Style lug nuts? Or are they the "shank style"... or is there a difference in those two? I couldn't find anything specifically when I searched, just that they're 7/16".

The wheels are from a Z, if that matters.

Thanks guys!

You need to measure the thickness of the wheel and find lugs that have a shank length about 2/3rds the thickness ideally. Make sure you get the matching washers. There is also the "unilug" type mags. If you have those (holes are slotted) you need special washers that sit in the slot for that particular bolt pattern, FWIW.

Mark