Page 1 of 1
sr20 trans mount?
Posted: Thu Aug 14, 2008 9:27 pm
by duckwalk
ha all. I was woundering what
trans mount you are using for the swap?
Re: sr20 trans mount?
Posted: Fri Aug 15, 2008 10:12 am
by spriso
We use the Energy Suspension GM transmission mount in all of our SR swaps:
Part number 3.1108G Cost should be about $25
It bolts right up to the transmission and away you go!
BTW, this info can be found on the engine swap wiki here:
http://www.311s.org/pmwiki-311/pmwiki.p ... 0deInstall
Michael
spriso motorsports
Re: sr20 trans mount?
Posted: Sat Aug 16, 2008 11:35 am
by duckwalk
Thanks for the help. The question i should have asked was what year make and model the mount came off of. For some reason that mounts bolt pattern looks to narrow. My s13 trans bolt holes are 4.25" wide.(but you knew that). Thanks again for the info. ken
Re: sr20 trans mount?
Posted: Sun Aug 17, 2008 10:30 am
by spriso
Thanks for the help. The question i should have asked was what year make and model the mount came off of. For some reason that mounts bolt pattern looks to narrow. My s13 trans bolt holes are 4.25" wide.(but you knew that).
Don't worry-- it bolts right up like it was made for it!
All I know is that the Energy Suspension mount is called a GM transmission mount, so I assume that it is pretty universal for 70s/80s GM products.
Michael