sr20 trans mount?

[duckwalk]

ha all. I was woundering what
trans mount you are using for the swap?

[spriso]

We use the Energy Suspension GM transmission mount in all of our SR swaps:





Part number 3.1108G Cost should be about $25

It bolts right up to the transmission and away you go!

BTW, this info can be found on the engine swap wiki here:

http://www.311s.org/pmwiki-311/pmwiki.p ... 0deInstall



Michael
spriso motorsports

[duckwalk]

Thanks for the help. The question i should have asked was what year make and model the mount came off of. For some reason that mounts bolt pattern looks to narrow. My s13 trans bolt holes are 4.25" wide.(but you knew that). Thanks again for the info. ken

[spriso]

Thanks for the help. The question i should have asked was what year make and model the mount came off of. For some reason that mounts bolt pattern looks to narrow. My s13 trans bolt holes are 4.25" wide.(but you knew that).

Don't worry-- it bolts right up like it was made for it!

All I know is that the Energy Suspension mount is called a GM transmission mount, so I assume that it is pretty universal for 70s/80s GM products.

Michael