just bought these for my Roadster....
Posted: Tue Feb 05, 2008 9:58 pm
Victor had/has a set of those....Looked very cool...
Phil
Datsun Roadster Forum-311s.org
The Resource For All Things Datsun Roadster S211/SPL212/310/311 Datsun Sports Roadster 1959-April 1970 circa 40,000 produced
https://www.311s.org/phpBB3/
just bought these for my Roadster....
Page 1 of 2
14x6 Revolutions
Posted: Tue Feb 05, 2008 11:22 pm
Posted: Tue Feb 05, 2008 11:47 pm
Are you going with the Antracite or the silver center?
Posted: Tue Feb 05, 2008 11:47 pm
doesn't Victor have a set of everything?
Posted: Wed Feb 06, 2008 10:24 am
Not yet.. But I'm working on it. Bought a set of Hoshino Impuls (circa 1983) last Saturday, Just cause they were cheap and i could play with them
Posted: Wed Feb 06, 2008 4:26 pm
I actually bought a set of each! One will go on the Roadster and the other on the 510. I also have a pair of 13X8 in black (too bad they are not 14's).
Victor you need to do a photo exhibit of all your wheels. I still want to see the Roadster with the SSR's. I have a pair of Starsharks that are nicely refurbished. I am looking for some Cosmics for my VW (just encase there are some out there....).
Victor you need to do a photo exhibit of all your wheels. I still want to see the Roadster with the SSR's. I have a pair of Starsharks that are nicely refurbished. I am looking for some Cosmics for my VW (just encase there are some out there....).
Posted: Wed Feb 06, 2008 4:28 pm
are these the Impulses you got?
http://cgi.ebay.com/ebaymotors/JDM-HOSH ... 3aUSQ3a102
http://cgi.ebay.com/ebaymotors/JDM-HOSH ... 3aUSQ3a102
Posted: Wed Feb 06, 2008 7:19 pm
No! Not the meshes and, Which car could I possibly fit those 10'' M.F.ers on? 
These are what I bought - 14 X5.5 @+13 is a very friendly roadster and 510 fit. And at 10.2lbs a piece, good spicey driving. They're 2 piece. I already took them apart for deep cleaning and painting.
These are what I bought - 14 X5.5 @+13 is a very friendly roadster and 510 fit. And at 10.2lbs a piece, good spicey driving. They're 2 piece. I already took them apart for deep cleaning and painting.
Posted: Wed Feb 06, 2008 7:30 pm
I realize that 10" are a little too wide for our cars (one can hope can't they?).
Posted: Tue Feb 19, 2008 10:01 pm
You got a smoking deal on those Revolutions...wish I paid that for mine..BTW I had to have my front wheels opened-up at my friend's machine shop on his lathe, as the front hubs are large in outer dia than the opening in the wheels..just and FYI.
Regards and good luck - Yasin
Regards and good luck - Yasin
Posted: Wed Feb 20, 2008 12:07 am
the seller did mention this to me. Unfortunately there has been a problem with delivery of the rims. Seems the UPS driver left a note on the door saying he left the rims at the back door. I was tracking the parcels (4 boxes since i got 2 complete sets) and saw they were delivered. When I went by the house they weren't there!! This is the second time I have had this happen. $ years ago the UPS driver thought it would be okay to leave a 1960 NOS VW panel door and a 1999 Ducati 996 frame at the FRONT door. Of course someone helped themselves to them. My neighbourhood is okay usually but someone cruising around sees the UPS guy drop stuff off at a door and leave them there is just too big of an invitation. Hopefully things get worked out.
Posted: Fri Feb 29, 2008 3:26 pm
wow 10" thats the dream..down the line o would like to have those on the car..LOL
Posted: Fri Feb 29, 2008 11:13 pm
I've got 15x10 in front and 15x14 in the rear.
Posted: Fri Feb 29, 2008 11:22 pm
Meeting someone tomorrow FOR YET ANOTHER SET OF WHEELS!!!
BUUUUUUHHHAHAHAHAHA!
BUUUUUUHHHAHAHAHAHA!
Posted: Fri Feb 29, 2008 11:41 pm
Do you have a photo of all your wheels lined up? I'm sure it takes quite a large storage area. Do you have a tire mounting machine and swap wheels and tires every week?