Posted: Wed Nov 01, 2006 11:56 am
I'd like a copy too please although my system is working just fine now.
ppc
ppc
Mark
Datsun Roadster Forum-311s.org
The Resource For All Things Datsun Roadster S211/SPL212/310/311 Datsun Sports Roadster 1959-April 1970 circa 40,000 produced
https://www.311s.org/phpBB3/
Any interest....(rear disc brakes- 12/15/07 update)
Page 2 of 2
Posted: Wed Nov 01, 2006 10:59 pm
Please remember to PM me if you want a set with your mailing address. I do need to know where to send this valuable information
Mark
Mark
Posted: Sat Dec 15, 2007 9:24 pm
Finally got around to hooking up the parking brake assembly. Pics show the modifications to the stock linkage to adapt to the 200sx parking brake cables. Pretty simple.
Cut the stock cable off the clevis and weld (or bolt, if you wish) on an approx. 8" long piece of 6mmx1.0 threaded rod. Your measurement may vary somewhat.
Pic of the custom cable mounting bracket. Those that got a copy of my drawings, this is what it looks like fabricated. Bolts in place of the stock pivot.
This is how it looks with the modified clevis connected to the brake cable adjuster.
There it is, a working parking brake for your rear disc brake conversion. Other than having to make a bracket to hold the cables, pretty simple. I can still supply templates/drawing for this conversion BUT not for a while, probably sometime early next year. If you want a copy, PM me with your address and I will send them out when I get a chance, just don't hold your breath. I know I sent out around 40-50 last time so a lot of you already have this. Steve, maybe you can add this to the original writeup on the main page?
Mark
Cut the stock cable off the clevis and weld (or bolt, if you wish) on an approx. 8" long piece of 6mmx1.0 threaded rod. Your measurement may vary somewhat.
Pic of the custom cable mounting bracket. Those that got a copy of my drawings, this is what it looks like fabricated. Bolts in place of the stock pivot.
This is how it looks with the modified clevis connected to the brake cable adjuster.
There it is, a working parking brake for your rear disc brake conversion. Other than having to make a bracket to hold the cables, pretty simple. I can still supply templates/drawing for this conversion BUT not for a while, probably sometime early next year. If you want a copy, PM me with your address and I will send them out when I get a chance, just don't hold your breath. I know I sent out around 40-50 last time so a lot of you already have this. Steve, maybe you can add this to the original writeup on the main page?
Mark
Posted: Mon Dec 17, 2007 10:59 am
I work at a Junkyard (northern Calif)....I'll keep inventory on 82-83 200sx brake parts as they arrive and advise when they are in stock. As of now we usually only inventory 1994 and later. The rest goes to scrap recycling. With the cost of square footage here in CA, you can't keep everything on speculation.
Happy Holidays, and happy motoring
Happy Holidays, and happy motoring
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Sat Jun 16, 2012 1:26 pm
um yes please send me this free info!
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Sat Jun 16, 2012 1:44 pm
As I stated in Tomakze's thread, I no longer have the templates available. Sorry.
Mark
Mark
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Fri Feb 01, 2019 12:59 am
I am very interested in the drawings/plans if you still have any.
Thank you,Jay R
Thank you,Jay R
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Tue Feb 12, 2019 8:46 pm
Sorry Jay, have not had these for years.
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Wed Feb 13, 2019 4:55 am
there is a write up in wiki on rear disc brakes with a drawing of the bracket.
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Wed Feb 13, 2019 5:41 am
The 200 SX rear calipers were scarce when I was looking a couple of years ago. Parking brake cables are even harder to find.
Re: Any interest....(rear disc brakes- 12/15/07 update)
Posted: Wed Feb 13, 2019 2:54 pm
I have calipers. No cables though.