Looking for 5-speed o-ring

[Habitat.pat]

I'm looking for the o-ring seal on the 5-speed strike rod. The part number in the parts manual is 32845-18800, which shows to be NLA from Nissan. I don't need a full gasket set, so I am looking for dimensions on the o-ring so I can get one elsewhere. Anyone have the measurements?

Thanks in advance.

Peace, Pat

[Habitat.pat]

Oops, wrong part number, should have been 23858-14600, which Nissan shows to be a current part.

Peace, Pat

[DAC21]

I'm looking for the o-ring seal on the 5-speed strike rod. The part number in the parts manual is 32845-18800, which shows to be NLA from Nissan. I don't need a full gasket set, so I am looking for dimensions on the o-ring so I can get one elsewhere. Anyone have the measurements?

Thanks in advance.

Peace, Pat

If you are referring to Part No 5 (o ring) I think you had it right the first time P/N 32845-18800, discontinued. I don't see P/N 23858-14600 coming up.

strike rod.jpg

[Habitat.pat]

Correct page, item 10.

[DAC21]

Correct page, item 10.

Gotcha, I think you may have also fat fingered in the wrong number. No, 10 is 32858-14600 , not 23858-14600. i do that daily

[Nissanman]

https://www.amayama.com/en/part/nissan/3284518800

[Erock311]

I see that some people made the correction on the part number. The reason I am responding is because the kit I used to rebuild my 4spd. had a lip seal instead of the o ring/cap setup. I think it was a Nissan gasket set, it was a long time ago. Trying to go thru my receipts, etc. to find more info. (same design as speedo.pinion seal, just sized for striking rod shaft). Wish I had more info at this time, might be able to find a usable lip seal that works.

[Habitat.pat]

Thanks for the responses, we found one at a dealer.

Peace, Pat