Datsun Roadster Forum-311s.org

I think I found the answer to this right before I posted. Going ahead with the post just to make sure I'm right. Just got my '68 2000 3.5 weeks ago. Checking the dipstick, I can't tell which one of the 3 marks is the full line. Owner's manual doesn't show anything. The engine had less than 100 miles on a complete rebuild when I bought the car. I've probably put another 200 miles on it. Looking at a dipstick for a roadster for sale on Ebay, it shows the same part number and the lowest mark is very clearly an 'L'. That leg evidently didn't get stamped well on my dipstick. . So I'm low on oil. Glad I got the 10 quarts in this afternoon I ordered a couple days ago to have on hand!!!! If I'm wrong, please reply.
Ideas on how much oil it takes to go from the low to high mark? In my American made vehicles it was always 1 quart. Don't want to guess and end up overfilling it.
Otherwise, carry on! Thanks! Jim.

Yes, I think you’re right.

MattC wrote: Fri Dec 06, 2024 4:48 pm Yes, I think you’re right.

IMG_8389.jpeg

Thanks Matt. I looked at the dipstick again after I got the oil level up to just under the full mark. There is a faint line for the leg of the 'L'. For whatever reason, the tool just didn't strike it right to indent the metal so that it is actually readable. Pulling up my picture in the original post, and enlarging it as big as you can, you can faintly see the line. All's good now!