Page 1 of 2
Which one?
Posted: Mon Aug 07, 2023 5:22 pm
by Mattk
I got bored and decided to make some center caps and then got an idea. I printed these out and slapped a coat of chrome paint. So I know this is loaded question but which one do you like?
IMG_0010.jpeg
IMG_0009.jpeg
Re: Which one?
Posted: Mon Aug 07, 2023 5:24 pm
by MattC
B
Re: Which one?
Posted: Mon Aug 07, 2023 5:46 pm
by jrusso07
B
Re: Which one?
Posted: Tue Aug 08, 2023 8:46 am
by PandaBoy
B
Re: Which one?
Posted: Tue Aug 08, 2023 8:53 am
by rwmann
B
Re: Which one?
Posted: Tue Aug 08, 2023 8:54 am
by rwmann
What's the cap outer diameter and how are they retained?
Re: Which one?
Posted: Tue Aug 08, 2023 9:07 am
by FergO2k
A
OK, I am the outlier, (no surprise there) but I like the flush face of that one in contrast to the inset of the other.
You are getting GREAT shine off your chrome rattle can finish, for sure!
Re: Which one?
Posted: Tue Aug 08, 2023 11:29 am
by Gregs672000
I'm A too.
Re: Which one?
Posted: Tue Aug 08, 2023 1:40 pm
by iloveredmeat
Personally, I like the depth of 'B'.
'A' makes the cap look like it's sticking out a bit too much.
Nice work either way!
Re: Which one?
Posted: Tue Aug 08, 2023 2:03 pm
by Alvin
Will the original caps work? I like "B" as it kind of feels like the original:
https://www.pine-engineering.co.nz/prod ... recap-60mm

Re: Which one?
Posted: Tue Aug 08, 2023 4:24 pm
by redroadster
A s if you got em....I don't especially love the cap label look
Re: Which one?
Posted: Wed Aug 09, 2023 8:48 am
by nismou20
A for me
Re: Which one?
Posted: Wed Aug 09, 2023 9:46 am
by Gregs672000
Funny, I keep going back and forth... I know, make em both!
Re: Which one?
Posted: Thu Aug 10, 2023 9:41 am
by FergO2k
One way to do this is to put one type on LH side, and other other set on RH side.
I think I have heard of folks doing this when they ruin a rim and the replacement is NLA.
Drive it for a month and see which one you prefer.
Re: Which one?
Posted: Thu Aug 10, 2023 9:48 am
by vorpal
Both!
Run them on alternate days of the week...