Page 1 of 1
throw out bearing for 67 1600
Posted: Tue Jul 11, 2023 12:13 pm
by sevenmilebridge
Just pulled the engine and trans out this morning. Got new clutch pressure plate and throw out bearing. The throw out bearing does not fit the receiver not even close got the kit from Datsun parts anyone ever have this problem.
Re: throw out bearing for 67 1600
Posted: Tue Jul 11, 2023 12:16 pm
by Datsunparts.comInc
We have sold the same OEM T/O bearing from the same supplier for 35 years. I would check to see if you have an aftermarket plastic sleeve and larger bearing that was sold with after market kits in auto parts stores, that would account for you thinking there is a problem.
This is what you may need:
https://datsunparts.com/collections/clu ... 9235612856
Dean
Re: throw out bearing for 67 1600
Posted: Tue Jul 11, 2023 12:25 pm
by sevenmilebridge
OK have figured it out just have the wrong sleeve The parts are correct just need new sleeve