Datsun Roadster Forum-311s.org

Hi,
I've been through the forum techwiki.
Sadly the Duralast 10030 cannot be ship overseas (unless i find a nice soul to send it to me!)

Through my investigations, i found some interpart change list:
• Datsun/Nissan 3062025500
• Datsun/Nissan 3062025501
• Datsun/Nissan 3062014601
• Datsun/Nissan
• Beck/Arnley 072-1241
• Centric Parts 138.42300
• Centric Parts 139.42300
• Perfection Exhaust 37213
• Fenco CS2092
• Wagner Brake F103448
• Autospecialty S-51300
• AMS Automotive S0653
• Wagner Brake SC103448
• Raybestos Brakes SC37211
• Raybestos Brakes SC37213
• Coni-Seal SC550620
• Aimco W909010
• Aimco W909012
• Nissan 3062014601
• Nissan 3062025500
• Nissan 3062025501

But sadly none of them was available and seemed discontinued.
Also read about Dorman CS37213 but could not understand if it was working on roadster yes or no! Listed on rockauto.
Would also be looking for the slave hose and make sure that Raybestos BH35046 hose is doing fine (rockauto listed)

Thanks for support!
Seb

Amazon listing has Customer review that Dorman CS37213 worked OK for their Datsun 521 Pickup. Roadster and 521 have common part number for the Slave cylinder. This is the 2-inch center hole to center hole version.

https://www.amazon.fr/Dorman-CS37213-do ... merReviews.

Price is crazy from Amazon France, 114 EU. This eBay USA Seller will ship to France for total price $54 (50 Euro)

https://www.ebay.com/itm/155309421260?e ... GTR=1#shId

I carry the 2inch hole to hole slave cylinder at sincitydatsuns.com and I am in the US but ship international as well.

@DAC21, thanks. Did read this and felt like it compatibility was not 100% sure. Dorman's on rockauto as well.
@zippy67roadster, i will visit you website. Thanks!

Labubre wrote: ↑Fri Apr 07, 2023 11:59 am @DAC21, thanks. Did read this and felt like it compatibility was not 100% sure. Dorman's on rockauto as well.
@zippy67roadster, i will visit you website. Thanks!

Seems I have read once or twice before that some re-used their old threaded piston rod when using the aftermarket slave cylinders, so hang onto that just in case.

I confirm that Dorman CS 37213 is fine on my 2000