I have ARP flywheel bolts on my R16 but don’t know what torque they should be tightened to. Anyone know if I should use the OEM 35 ft. lbs. or should it be higher? I was working off a posted torque listing but after torquing them to 58 noticed that the listing was for a U20. Just checking before I make any changes.
Peace, Pat
ARP flywheel bolt torque R16
Moderators: notoptoy, S Allen, Solex68
-
Habitat.pat
- Roadsteraholic
- Posts: 666
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
ARP flywheel bolt torque R16
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
-
Bwk2000
- Roadsteraholic
- Posts: 982
- Joined: Mon Aug 23, 2021 3:09 pm
- Location: Halifax, Nova Scotia
- Model: 1500/1600
- Year: High Windshield-68-70
Re: ARP flywheel bolt torque R16
Pat. I believe the R16 range is 35-44 ft.lbs for the OEM bolts.
From what I understand, ARP bolts require a higher torque (it should have been written right on the package they came in).
At any rate, the chart below should help:
From what I understand, ARP bolts require a higher torque (it should have been written right on the package they came in).
At any rate, the chart below should help:
You do not have the required permissions to view the files attached to this post.
Kai
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
-
Bwk2000
- Roadsteraholic
- Posts: 982
- Joined: Mon Aug 23, 2021 3:09 pm
- Location: Halifax, Nova Scotia
- Model: 1500/1600
- Year: High Windshield-68-70
Re: ARP flywheel bolt torque R16
Since it looks like the flywheel to crank shaft bolts are 3/8” from the table below. I would say 45 ft.lbs should do the trick.
You do not have the required permissions to view the files attached to this post.
Kai
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
-
23yrRebuild
- Roadster Fanatic-Site Supporter
- Posts: 1163
- Joined: Sat Oct 25, 2003 2:19 pm
- Location: 3rd rock from the sun
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: ARP flywheel bolt torque R16
True Dat...
https://arpinstructions.com/generaltorque.html
https://arpinstructions.com/generaltorque.html
Mike - '67 Stroker / 5-Speed