Datsun Roadster Forum-311s.org

I want to upgrade my 64 roadster with the big brake kit. However, being that the 64 are drum brakes, will the big brake kit work? Can I use the drum rotor hub?

If the set up works, I am guessing that the 15 x 7 rims will work just fine as well.

Finally, if this works, I would like the swap out my springs like I did with my 1970 and give it a little lowered front end. Will the clearance work with the 64? Again, I am guessing it should work. Can anyone confirm?

Thanks,

Ed

You would first need to swap over the front end from either a 1600 or 2000 and then do the big brake upgrade … Not exactly a cheap option. Yes, you would also need at least 15” rims. The more cost effective upgrade option is to go with aluminum finned Z-drums all around. As for the front springs, once you decide which brake option and tire/rim size you’re going with, you can adjust the front stance with a variety of aftermarket springs (available from multiple vendors here) that will work nicely.

The smaller flares on the early cars may impact wheel and tire size compared to the latter models.