Wheel Stud Replacement for 15x7 Panasports
Posted: Sun Feb 19, 2023 1:48 pm
Hi guys,
I did a bit of digging and found some info on the wheel studs needed to fit the 15x7 Panasports correctly. Mine had the stock studs still so they only had about 2 threads of engagement on the lug nuts that were not broken off.
These are inexpensive and easy to find parts. I'm using the stock diameter and thread size of 7/16 - 20 for the replacements. There may be better solutions but I couldn't find any. Thanks to those that posted info in the tech wiki to point me in the right direction. My setup for this is stock front disc and rear drum brakes with 15x7 Vintage Panasports on the 1969 1600.
I forgot to take pics of the Rear Stock Stud fitment and Front Longer Stud fitment. I'm in the process of modifying my brakes so I may end up using different sizes in the near future. I'll post that info when I get it sorted.
Rear Stock Length Replacement
(Press-In, 7/16-20 in. RH, .472 in. Knurl, 1.50 in) = Dorman P/N: 610-186
These fit nice and tight.
Front Stock Length Replacement
(Press-In, 7/16-20 in. RH, .480 in. Knurl, 1.25 in) = Moser Engineering P/N: 8060
I have not verified this fits but they should work based on measurements
Longer Rear Studs
(Press-In, 7/16-20 in. RH, .475 in. Knurl, 1.75 in) = Dorman P/N: 610-259
These fit nice and tight.
Longer Front Studs
(Press-In, 7/16-20 in. RH, .472 in. Knurl, 1.50 in) = Dorman P/N: 610-186
These fit nice and tight.
I did a bit of digging and found some info on the wheel studs needed to fit the 15x7 Panasports correctly. Mine had the stock studs still so they only had about 2 threads of engagement on the lug nuts that were not broken off.
These are inexpensive and easy to find parts. I'm using the stock diameter and thread size of 7/16 - 20 for the replacements. There may be better solutions but I couldn't find any. Thanks to those that posted info in the tech wiki to point me in the right direction. My setup for this is stock front disc and rear drum brakes with 15x7 Vintage Panasports on the 1969 1600.
I forgot to take pics of the Rear Stock Stud fitment and Front Longer Stud fitment. I'm in the process of modifying my brakes so I may end up using different sizes in the near future. I'll post that info when I get it sorted.
Rear Stock Length Replacement
(Press-In, 7/16-20 in. RH, .472 in. Knurl, 1.50 in) = Dorman P/N: 610-186
These fit nice and tight.
Front Stock Length Replacement
(Press-In, 7/16-20 in. RH, .480 in. Knurl, 1.25 in) = Moser Engineering P/N: 8060
I have not verified this fits but they should work based on measurements
Longer Rear Studs
(Press-In, 7/16-20 in. RH, .475 in. Knurl, 1.75 in) = Dorman P/N: 610-259
These fit nice and tight.
Longer Front Studs
(Press-In, 7/16-20 in. RH, .472 in. Knurl, 1.50 in) = Dorman P/N: 610-186
These fit nice and tight.