Page 1 of 2

Datsun Roadster Floor Pans

Posted: Mon Feb 06, 2023 6:32 pm
by TJFLY
Datsun roadster floor pans for sale. I will be making left and right quarters and halves in a limited run. Quarters are $200 and halves are $425. Floor pans are hand made from 18 gauge cold rolled steel and extend from the floor to the lower part of the transmission tunnel. First ten orders receive free, yes free ground shipping in the lower U.S. 48 states. Hawaii, Alaska, U.S. territories, and International countries, shipping is still 100% available but rates will vary depending on location. Thanks and keep those Roadsters going.

Re: Datsun Roadster Floor Pans

Posted: Tue Feb 07, 2023 12:23 am
by iloveredmeat
Wow! Those look great Tajhuan. I could have used your fab skills for a trunk patch a while ago.

Let's get together for some Chinese Tapas and catch up soon.

Peter

Re: Datsun Roadster Floor Pans

Posted: Tue Feb 07, 2023 11:20 pm
by TJFLY
Thanks Peter!! That’s sounds great . First round on me.

Re: Datsun Roadster Floor Pans

Posted: Wed Feb 08, 2023 10:29 am
by S Allen
I am going to move this to New Production Parts as it will disappear in 30 or so days here. Thanks.

Steve

Re: Datsun Roadster Floor Pans

Posted: Thu Feb 09, 2023 2:51 pm
by Andrew Griffith
67 1/2 and 66..full pans do you have them and if so your price. Andrew

Re: Datsun Roadster Floor Pans

Posted: Fri Feb 10, 2023 2:03 am
by TJFLY
Yes. I can provide all years from 63-70. The price for each full left or right side is $425. Thanks

Re: Datsun Roadster Floor Pans

Posted: Sat Feb 11, 2023 8:59 am
by Andrew Griffith
Thanks Steve

Re: Datsun Roadster Floor Pans

Posted: Sun Feb 12, 2023 1:15 am
by SPLutah
Any chance you could do a parcel shelf or a full trunk floor panel?

Re: Datsun Roadster Floor Pans

Posted: Sun Feb 12, 2023 2:41 am
by TJFLY
SPLutah wrote: Sun Feb 12, 2023 1:15 am Any chance you could do a parcel shelf or a full trunk floor panel?
I am sure I could. Did you need the vertical portion or the Horizontal portion of the shelf? I will start working on a trunk section too and post them when I am done. What year is your roadster? Going out of town next week so I will get stared once I return. Stay tuned. Thanks

Re: Datsun Roadster Floor Pans

Posted: Tue Feb 14, 2023 8:06 am
by Andrew Griffith
You may have posted this and I missed it. What is the total length of the full pans. I'm wanting them to go back up to the rear pan section that starts to angle up.??

Re: Datsun Roadster Floor Pans

Posted: Tue Feb 14, 2023 1:18 pm
by TJFLY
Hey, I had a few people ask about the length and I may have missed you in my reply. The length of the full floor pan is 54.5 inches. It extends from the front fire wall to the base of the rear shelf in the back of the car. I could trim it for you if you just want it to stop at the part of the floor where it angles up, or you could, to make sure you get a perfect fit. Thanks

Re: Datsun Roadster Floor Pans

Posted: Wed Feb 15, 2023 8:36 am
by Andrew Griffith
Great thank you..I would trim it. Thanks Andrew

Re: Datsun Roadster Floor Pans

Posted: Wed Feb 15, 2023 4:23 pm
by Hialeah_Datsun
Hi, I need a complete floor. Would you be able to ship within the next week?

Re: Datsun Roadster Floor Pans

Posted: Wed Feb 15, 2023 7:54 pm
by TJFLY
Yes, the floor pans would ship Wednesday or Thursday of next week Ground shipping. Thanks

Re: Datsun Roadster Floor Pans

Posted: Thu Feb 16, 2023 9:47 am
by Hialeah_Datsun
Are these patches or would your floors replace the entire floor if I completely remove my flooring?