Page 1 of 1
Alternator mounts
Posted: Fri Sep 23, 2022 2:23 pm
by sevenmilebridge
I'm trying to move the alternator to the right side but having trouble finding a lower bracket to work. I have the old air pump but bracket is gone anyone have a suggestions or have the parts needed I can buy??????
Re: Alternator mounts
Posted: Fri Sep 23, 2022 11:42 pm
by Gregs672000
I believe that swap is documented in the wiki. As I recall JT has a kit...
Re: Alternator mounts
Posted: Sat Sep 24, 2022 7:53 am
by sevenmilebridge
If someone has the old cast iron bracket for the air pump I'll buy it. I can fit just need the bracket
Re: Alternator mounts
Posted: Sat Sep 24, 2022 4:38 pm
by Habitat.pat
I have a spare air pump bracket from a 67.5 1600. Will that work for you?
Peace,
Pat
Re: Alternator mounts
Posted: Sat Sep 24, 2022 5:33 pm
by Habitat.pat
I pulled the mount out of the pile & find that the part number stamped into it does not mach what the parts manual calls out, so I assume it it an early alternator mount from my 1600. I couldn't find the part in the parts manual, so I can't verify the part number. It had an alternator mounted on it on my 1600.
The part number is 21386-12900 - I think.
IMG_0966.jpg
IMG_0967.jpg
IMG_0968.jpg
Peace,
Pat
Re: Alternator mounts
Posted: Sun Sep 25, 2022 5:17 pm
by spl310
Looks like an early mount that has been cut
Re: Alternator mounts
Posted: Sun Sep 25, 2022 7:11 pm
by Habitat.pat
Thanks. I think it had a gm one wire on it when I bought the car. Can’t find the mount from the other 1600 that had an OEM alternator. I have a Denso kit on order from JT now.
Peace,
Pat