Page 1 of 1
decipher year "code"
Posted: Sun Aug 14, 2022 3:42 pm
by tjp
I see this when searching a part number from a NOS RL quarter panel. Does this mean that the part is for the 67.5 and the 68 model years? If so, I thought the rear quarter panels were one year only for the 67.5.... tx
Re: decipher year "code"
Posted: Sun Aug 14, 2022 3:48 pm
by rwmann
“Valid 10/1967 to 09/1969â€
Re: decipher year "code"
Posted: Sun Aug 14, 2022 4:50 pm
by tjp
rwmann wrote: Sun Aug 14, 2022 3:48 pm
“Valid 10/1967 to 09/1969â€
Where are you getting "69" from please?
Re: decipher year "code"
Posted: Sun Aug 14, 2022 8:32 pm
by spl310
I'm sure it was a typo - should be 09/1968
Re: decipher year "code"
Posted: Mon Aug 15, 2022 7:55 am
by rwmann
Yes, a typo. So basically, 1968 model year production.
Re: decipher year "code"
Posted: Mon Aug 15, 2022 9:31 am
by tjp
Still seeking clarification on this quarter panel. It is ONLY for the 68 model year? Or, in other words, will it work for the 69 & 70 as I thought was the case? (I thought the rear quarter panels were the same from 68-70.)
thanks
Re: decipher year "code"
Posted: Mon Aug 15, 2022 11:22 am
by Bwk2000
tjp wrote: Mon Aug 15, 2022 9:31 am
Still seeking clarification on this quarter panel. It is ONLY for the 68 model year? Or, in other words, will it work for the 69 & 70 as I thought was the case? (I thought the rear quarter panels were the same from 68-70.)
thanks
Tim.
No side lights or bumper insulator ends (two rubber pieces) on the ‘68. Just drill the appropriate holes and the ‘68 quarter panel will work fine on a ‘69-‘70.
Re: decipher year "code"
Posted: Mon Aug 15, 2022 1:10 pm
by tjp
Bwk2000 wrote: Mon Aug 15, 2022 11:22 am
tjp wrote: Mon Aug 15, 2022 9:31 am
Still seeking clarification on this quarter panel. It is ONLY for the 68 model year? Or, in other words, will it work for the 69 & 70 as I thought was the case? (I thought the rear quarter panels were the same from 68-70.)
thanks
Tim.
No side lights or bumper insulator ends (two rubber pieces) on the ‘68. Just drill the appropriate holes and the ‘68 quarter panel will work fine on a ‘69-‘70.
The differences, just explained. That is what I was looking for.
Thanks!!!