Page 1 of 1

How to test Ignition coils with a Multimeter??

Posted: Thu Jun 02, 2022 10:53 am
by SP3
I have several coils in my spares box that I would like to confirm which are good backups and which can be tossed.

Is there a way to test them off the car with a meter to see if good? Assuming should pass a certain amount of Resistance or some other measure?

Thanks

Re: How to test Ignition coils with a Multimeter??

Posted: Thu Jun 02, 2022 12:38 pm
by DAC21
Here is something I found. Easy enough, but I have no idea what the Roadster's coil spec should be.


Re: How to test Ignition coils with a Multimeter??

Posted: Thu Jun 02, 2022 5:54 pm
by redroadster
If it magnatizes ...pulls a long screwdriver to it
It's a good sign , careful with a condenser about the shock of trying to get it to discharge .
this will not tell you if the insolator leaks really
Check the high voltage post for ohms too
I used to take customer s coils home that wanted them tested swap them on a CubCadet 128 ( it has a automotive coil )

Re: How to test Ignition coils with a Multimeter??

Posted: Thu Jun 02, 2022 7:51 pm
by spl310