Page 1 of 1

Gauge grounding

Posted: Sun Dec 12, 2021 9:56 pm
by joe fremeau
Hi Could someone tell me if gauge light only light when twisted in the gauge. When i twist them in they no not work even though the pen light shows power thanks

Re: Gauge grounding

Posted: Mon Dec 13, 2021 1:02 am
by Nissanman
If you have painted or treated the rear surface of the dash panel pressing, you may find that the gauges do not connect to ground satisfactorily.
When I rebuilt my dash, I ran a separate ground wire to all the gauges, daisy chain fashion, to a common ground point.
Connect the wire underneath one of the dash instrument clamp screws using a slip in "open" type terminal.
Relying on mechanical grounds is always suspect as things can change and cause you grief with intermittent faults.

Re: Gauge grounding

Posted: Mon Dec 13, 2021 11:10 am
by jonny8
After I powered coated my dash, I created this wire so that the sound was connected... without I had no gauge lights!
IMG_5262 4-small.jpg