Datsun Roadster Forum-311s.org

I would greatly appreciate advice how to wire in a new light switch for my 1969 2000. I purchased a new 3 step pull switch with 6 wires, 3 black on one side and 3 blue on the other. I noticed the old switch had one jumper connection, this new one does not. I have studied the wiring diagram and am still struggling. I can make the headlights work but not the running lights or parking lights. I have the following five wires coming from my dash. Please help with the connections. Thanks!!

Green with blue
Red with yellow
Red with green
Green with yellow
Black

The 69-70 headlight switch is unique to those cars. If you buy an aftermarket one I'm not sure you can make it work. Headlight power is separated from all other light power.

Green with white not yellow.

http://kendo-usa.org/datsun/datsun_head ... _69_70.pdf

For anyone interested, I was able to make the aftermarket switch work with the help of Kendo's wiring diagram. I sent the file to a blueprinter so I could read it. Thanks Kendo! I just added a "pig tail" to the switch and everything worked just fine. I saved $200!