Page 1 of 1
clutch pressure plate bolt torque?
Posted: Thu Aug 26, 2021 12:14 pm
by TucsonJim
Can anyone tell me the proper torque specification for the 6 8mm x 1.25 bolts that secure the pressure plate to the flywheel?
As always, thanks for your help.
Jim
Re: clutch pressure plate bolt torque?
Posted: Thu Aug 26, 2021 1:48 pm
by Bwk2000
I believe the range is between 18.1 - 25.3 ft-lbs.
22 ft-lbs sounds like a nice round number
Re: clutch pressure plate bolt torque?
Posted: Thu Aug 26, 2021 2:16 pm
by Solex68
20 ft/lbs for an ASCO flywheel. 25 for a steel stock flywheel. Do not do 35 ft/lbs as it is listed somewhere.