R16/18/20 EFI manifold
Posted: Wed May 12, 2021 12:03 am
Many years ago when built the 1800 engine, I had Farrell start a second manifold. The project was abandoned and sat on the shelf since then.
Farrell has it again, and doing some work on it. I will NOT be using it as I am moving to ITB's.
If you are interested, I will forward Farrell's email to you and you can get the details and discuss purchase..or not. I have no idea at this time what he would want for it, or I would put it in the Classified section.
He has the runners which are ready to bolt to the head. Last I saw it would still need injector bungs and a throttle body at about 2", fuel rail and mounts.
Farrell has it again, and doing some work on it. I will NOT be using it as I am moving to ITB's.
If you are interested, I will forward Farrell's email to you and you can get the details and discuss purchase..or not. I have no idea at this time what he would want for it, or I would put it in the Classified section.
He has the runners which are ready to bolt to the head. Last I saw it would still need injector bungs and a throttle body at about 2", fuel rail and mounts.