Datsun Roadster Forum-311s.org

Hi folks, got another one for you. Have a NOS right side fender. From what I can make out of the part number stamped on it, it appears to be p/n 63100-147xx. The last two digits may be "00" but not positive. I have several e-versions of roadster parts manuals, but can't figure out which years this fender will fit. Pics of the fender are below.

So the help that I need us what years/models will this fender fit? From the research I have done (and if I understand correctly what I've read ), there are differences at the rear of the fenders where they wrap over the cowl so not all roadster fenders fit all years.

Any insight that those knowledgeable on these fenders can provide would be much appreciated!!

1500

spl310 wrote: ↑Sat Feb 27, 2021 7:10 pm1500

Thanks SPL310......so essentially this will fit '63 thru '65 only?

Well, it will bolt onto the 1600 and 2000, but the flare is way smaller. You can just ship it to me - along with it's mate.

Hi folks, I had a question from someone who is interested in purchasing this fender, but I don't know the answer. Perhaps someone can help?

Will this fender fit a 1966 1600 roadster? He thinks the '66 did not have the larger flares like the '67 and later fenders.

Thank you very much for your help!!

The flare is likely noticeably different for 1500. Hard to tell from the photos.

Based on the flair and the holes for emblem and side molding, looks like a 66/67 early type fender.

1966-67 medium flare fender for 1600 . 1500 fenders end with 12900 or 13000.
1500 fenders have long moulding going to the front, this one does not have the holes for long front fender spear.
Ross

Yep, I noticed that after my post too. Has to be 65-67 me thinks