will this fit a 1600 Roadster?
https://www.ebay.com/itm/DATSUN-SPL311- ... SwWDlcP0M7
Datsun header?
Moderators: notoptoy, S Allen, Solex68
-
ehmer
- Forum Newb
- Posts: 2
- Joined: Wed Dec 23, 2020 4:30 pm
- Location: WISCONSIN
- Model: 1500/1600
- Year: High Windshield-68-70
Datsun header?
You do not have the required permissions to view the files attached to this post.
-
dads311
- Roadster Fanatic-Site Supporter
- Posts: 203
- Joined: Sun Dec 04, 2016 9:24 pm
- Location: Emmett, Id.
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Datsun header?
I don't think that will work. It doesn't have enough bolt flanges and is shaped all wrong and the flange needs to have about ½" spacers where the bolts go to make it the same thickness as the intake manifold.
Check out the header sale event in the vendor ads.
Check out the header sale event in the vendor ads.
You do not have the required permissions to view the files attached to this post.
Mike
rebuilt dads 67.5 1600
1952 GMC 302ci 6cyl w/cam and 3 deuces
1965 Mustang (Wife's)
1971 Nova (Son Claimed)
rebuilt dads 67.5 1600
1952 GMC 302ci 6cyl w/cam and 3 deuces
1965 Mustang (Wife's)
1971 Nova (Son Claimed)
-
Daryl Smith
- Roadster Fanatic-Site Supporter
- Posts: 1682
- Joined: Wed Sep 08, 2004 1:53 pm
- Location: Not Here
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Datsun header?
That won't clear the starter.
For the R16 the header needs to come straight down at or ahead of cyl's 2 & 3 then 90* to go back and through the frame. There is a small rectangular space that it pretty much has to go through which is bordered by the engine mount and starter (forward and back) and the engine and frame (side to side). With some custom exceptions, but, the one you linked is not one.
For the R16 the header needs to come straight down at or ahead of cyl's 2 & 3 then 90* to go back and through the frame. There is a small rectangular space that it pretty much has to go through which is bordered by the engine mount and starter (forward and back) and the engine and frame (side to side). With some custom exceptions, but, the one you linked is not one.
-
ehmer
- Forum Newb
- Posts: 2
- Joined: Wed Dec 23, 2020 4:30 pm
- Location: WISCONSIN
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Datsun header?
Thanks for the replies,
does anyone know what it may fit?
Maybe some other Datsun model?
or some other make?
does anyone know what it may fit?
Maybe some other Datsun model?
or some other make?