Page 1 of 1

Relay Can mounting

Posted: Thu Dec 17, 2020 4:04 pm
by yusef
Hello,

Can someone show me a photo of how the two relay cans on the 69 2000 are mounted under the dash?

Thanks,
Joseph

Re: Relay Can mounting

Posted: Thu Dec 17, 2020 5:53 pm
by rwmann
They are mounted high, towards the front, on the left sidewall of the driver’s footwell.

Re: Relay Can mounting

Posted: Thu Dec 17, 2020 7:19 pm
by yusef
Is there a bracket that holds them? Mine are just hanging from the wires now.

Re: Relay Can mounting

Posted: Thu Dec 17, 2020 8:47 pm
by rwmann
If memory serves, the metal part of the cans snap into a bracket fixed to the sidewall with what look like protruding metal fingers.

Re: Relay Can mounting

Posted: Thu Dec 17, 2020 9:07 pm
by Curtis
flasher_cans_68.jpg

Re: Relay Can mounting

Posted: Fri Dec 18, 2020 1:14 pm
by Linda
As I recall, the screw is the ground and needs to be clean and tight to bare metal for best performance. It can get rusty up there.
Linda

Re: Relay Can mounting

Posted: Sat Jan 02, 2021 9:29 pm
by yusef
So I determined my relay cans don't have the little mounting stud attached to them. Is there a source for relays cans that have the mounting stud?

Thanks,
Joseph

Re: Relay Can mounting

Posted: Sat Jan 02, 2021 9:42 pm
by Curtis

Re: Relay Can mounting

Posted: Sat Jan 02, 2021 10:12 pm
by yusef
Thanks, bit spendy for a flasher can, but at least they're available.

Re: Relay Can mounting

Posted: Sun Jan 03, 2021 12:29 pm
by Curtis
Not if you buy two or more and you get the original type can for the car. Only difference is the hazard can was gold colored. I bought some from Thailand along with a couple other parts. They were exactly what I wanted.