Minimum rotor thickness?
Posted: Thu Dec 10, 2020 8:07 pm
What is the minimum rotor thickness spec for 1967 1/2 1600 roadster?
From the DBA Cattledog I have: -
Original thickness = 10.4mm
Minimum thickness = 9.4mm
Datsun Roadster Forum-311s.org
The Resource For All Things Datsun Roadster S211/SPL212/310/311 Datsun Sports Roadster 1959-April 1970 circa 40,000 produced
https://www.311s.org/phpBB3/
Minimum rotor thickness?
Page 1 of 1
Re: Minimum rotor thickness?
Posted: Thu Dec 10, 2020 11:52 pm
Re: Minimum rotor thickness?
Posted: Fri Dec 11, 2020 9:11 am
Nissanman, do you have specs for the rear drums?
Re: Minimum rotor thickness?
Posted: Fri Dec 11, 2020 6:43 pm
Certainly 
Internal Diameter = 228.6mm
Maximum internal diameter = 229.5
These specs. are for the rear drum as fitted to a heap of Nissan/Datsun vehicles which also fit the Fairlady [DBA1700].
For example, I used some rear drums from the Datsun 510/610 and the were identical to the worn ones.
Internal Diameter = 228.6mm
Maximum internal diameter = 229.5
These specs. are for the rear drum as fitted to a heap of Nissan/Datsun vehicles which also fit the Fairlady [DBA1700].
For example, I used some rear drums from the Datsun 510/610 and the were identical to the worn ones.
Re: Minimum rotor thickness?
Posted: Fri Dec 11, 2020 7:06 pm
Thank you, Nissanman!
Mike, this accords with Chilton's specs noted previously:
viewtopic.php?f=2&t=33952&p=311168&hili ... es#p311168
Jon
Mike, this accords with Chilton's specs noted previously:
viewtopic.php?f=2&t=33952&p=311168&hili ... es#p311168
Jon
Re: Minimum rotor thickness?
Posted: Fri Dec 11, 2020 7:09 pm
Thanks for the info guys.