Best tip for more power...

Place to put all stickies after a month.

Moderators: notoptoy, S Allen, Solex68

User avatar
redroadster
Roadsteraholic
Posts: 2402
Joined: Tue Mar 12, 2013 10:58 am
Location: KCMO
Model: 1500/1600
Year: High Windshield-68-70

Re: Best tip for more power...

Post by redroadster »

redroadster wrote: Thu Nov 19, 2020 5:47 pm
bossbob wrote: Thu Nov 19, 2020 2:42 pm So if I stop drinking beer and lose 20lbs. My car will have 2 more horsepower?
No but you will
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
greydog
Roadster Fanatic-Site Supporter
Posts: 1790
Joined: Sat Nov 21, 2009 11:37 pm
Location: Vancouver, Washington
Model: 1500/1600
Year: High Windshield-68-70

Re: Best tip for more power...

Post by greydog »

So, if I want 2 liter Solex performance in the 69 1600, all I've gotta do is eliminate 600 lbs and have the engine run like new.
If I just toss the body I'll be most of the way there.
We're not talking about a '72 Buick wagon here, meaningful weight reduction is not as practical as an engine swap.
Dan
SPL311 aka Skooter. Sold. Now wasting away in the SF area.
1990 Nissan 300zx. Sold this one too.
2018 VW Tiguan
User avatar
Curtis
Site Supporter
Posts: 4057
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Best tip for more power...

Post by Curtis »

More power: buy modern lightweight car with big fuel injected, turbo'd, or supercharged engine. Or a damn Tesla.
66 stroker, almost done.
67 basket case, paint coming soon.
User avatar
mraitch
Roadsteraholic
Posts: 3629
Joined: Mon Oct 02, 2006 7:03 pm
Location: Lake Balboa (SFV) - CA
Model: 1500/1600
Year: High Windshield-68-70
Contact:

Re: Best tip for more power...

Post by mraitch »

+1 on the diet
not sure on the wax - unless friction - only noticeable 145+
+1 on go faster stripes - the more the merrier - just make sure they are horizontal - not those annoying slow down 45 degree BRE stripes, or even Paul Gabriels- subtle under paint ones , not impressed.
Peter Harrison
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California
User avatar
Mackn367
Site Supporter
Posts: 518
Joined: Tue Mar 27, 2018 3:38 pm
Location: Orange County, CA
Model: 1500/1600
Year: Low Windshield-64-67.5
Contact:

Re: Best tip for more power...

Post by Mackn367 »

greydog wrote: Thu Nov 19, 2020 9:47 pm So, if I want 2 liter Solex performance in the 69 1600, all I've gotta do is eliminate 600 lbs and have the engine run like new.
If I just toss the body I'll be most of the way there.
We're not talking about a '72 Buick wagon here, meaningful weight reduction is not as practical as an engine swap.
Dan
Weight reduction is not as practical as an engine swap? Hahaha sorry but I have to disagree.

Weight reduction = free
New engine swap = a lot more than free ;)

Also I wasn't comparing my 1600 to a 2 liter solex so I'm not sure how that got thrown in. I simply said weight reduction is a great tip for "increasing" your hp
Nick
1967.5 Roadster 1600
VIN: SPL311-13038
Orange County, CA
JT68
Talented Enthusiast
Posts: 2921
Joined: Sun Jan 27, 2013 9:43 am
Location: Cumming, GA

Re: Best tip for more power...

Post by JT68 »

Keith mentioned rotating mass. Nick that is a major reason your engine is so fun.

I doubt it’s making more than SAE100hp and unless you are on a highway in Montana, you never using that..

It's torque in the useful powerband 3k-6500 that makes it so fun on the street and a very light rotating assembly

Your engine’s rotating and reciprocating mass are much less than 90% of other 1600’s and 99% of U and H20’s. Makes a huge difference in the way it accelerates.

You are certainly right that shedding weight is helpful where possible.
LT/JT
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
User avatar
redroadster
Roadsteraholic
Posts: 2402
Joined: Tue Mar 12, 2013 10:58 am
Location: KCMO
Model: 1500/1600
Year: High Windshield-68-70

Re: Best tip for more power...

Post by redroadster »

Gregs672000 wrote: Wed Nov 18, 2020 1:58 pm Weight reduction was central to the approach of Lotus. You don't need 500hp to push around a 1400lb car. Helps in the corners too!
But weight keeps you from sliding off the road (public roads )and sure braking
Low Lbs per square inch on tires racing around
My 86 Subaru XT turbo coupe ...I put 80 series wide tires on it ...had 13" alloy s
It would slide braking when you weren't expecting .taking a long curve a bit to fast , it slid 9" where a heavier only 2-3 "
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Daryl Smith
Roadster Fanatic-Site Supporter
Posts: 1623
Joined: Wed Sep 08, 2004 1:53 pm
Location: Not Here
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Best tip for more power...

Post by Daryl Smith »

"Your engine’s rotating and reciprocating mass are much less than 90% of other 1600’s and 99% of U and H20’s. Makes a huge difference in the way it accelerates."

^ This. Modern equivalents of pistons/rods in engines of similar displacements as the 1600 and 2000 engines in our cars are near half the weight or LESS!
The difference this makes in performance cannot be overstated. It is a night and day difference. There are no downsides. It also makes for a smoother running engine with the reduction in reciprocating weight. Combined with a lightweight flywheel, even with no other changes, the engine with the lightweight parts will have a big advantage.
User avatar
Mackn367
Site Supporter
Posts: 518
Joined: Tue Mar 27, 2018 3:38 pm
Location: Orange County, CA
Model: 1500/1600
Year: Low Windshield-64-67.5
Contact:

Re: Best tip for more power...

Post by Mackn367 »

JT68 wrote: Fri Nov 20, 2020 11:54 pm Keith mentioned rotating mass. Nick that is a major reason your engine is so fun.

I doubt it’s making more than SAE100hp and unless you are on a highway in Montana, you never using that..

It's torque in the useful powerband 3k-6500 that makes it so fun on the street and a very light rotating assembly

Your engine’s rotating and reciprocating mass are much less than 90% of other 1600’s and 99% of U and H20’s. Makes a huge difference in the way it accelerates.

You are certainly right that shedding weight is helpful where possible.
Right I also completely agree with that - which is why I had to opt in for your lightened flywheel ;)

I'm going to do a few test runs on a straight closed road to see what kind of times I am getting (maybe 1/4 mile, 0-60, etc). Technically I have only once gone full throttle from 0-70 and I was VERY happy with how it felt. But that was not timed at all so who knows maybe it just felt really good lol. Thanks again JT for all the great work you put into this engine :)
Nick
1967.5 Roadster 1600
VIN: SPL311-13038
Orange County, CA
Post Reply