Watanabe Offset Identification Help
Moderators: notoptoy, S Allen, Solex68
- tknishi
- Site Supporter
- Posts: 100
- Joined: Thu Oct 21, 2010 10:22 am
- Location: Honolulu, HI
Watanabe Offset Identification Help
I'm looking at a set of Watanabe, (well technically two RS and two Black Racing), but i'm having trouble identifying the offset on the RS. The owner sent these pics as he is unsure of the offset also. These wheels are 15x7. The only marking I am unsure about is the F8, I thought that might be the offset, but when doing research it seemed like it was a model name? Anybody know how to identify the offset? Thanks!
You do not have the required permissions to view the files attached to this post.
'68 2000
- tknishi
- Site Supporter
- Posts: 100
- Joined: Thu Oct 21, 2010 10:22 am
- Location: Honolulu, HI
Re: Watanabe Offset Identification Help
Just to follow up, I ended up picking up these wheels. From my research, it seemed like these were offered in a +15 or +21. They fit perfectly, so I am guessing the wheels above are +15 offset. So I have Watanabe RS 15x7, +15, on 205/50/15 in the back, and the Black Racing 15x6.5, +17, on 195/50/15 in the front.
'68 2000
-
- Roadster Nut
- Posts: 40
- Joined: Tue Dec 30, 2014 9:50 pm
Re: Watanabe Offset Identification Help
I believe F8 is the style reference for the wheels. This style is 8 spoke, but not sure if that corresponds to the style. Glad they fit!
1969 2000 Roadster
Los Angeles, CA
Los Angeles, CA
-
- Roadster Fanatic
- Posts: 148
- Joined: Fri Jul 01, 2011 10:36 am
- Location: Bozeman, Montana
- Model: 2000
- Year: High Windshield-68-70
Re: Watanabe Offset Identification Help
tknishi, how about some pics of how they fit? I have some 205-50-15 BF Goodrich Rivals I would like to stuff under my 70.
1968 510 Wagon
1970 Roadster 1600/U20/5 sp. swap
1972 510 4 dr. vg30e/5 sp. ricky racer
1971 510 shell behind the shop, r.i.p.
I drive a Roadster or 510 almost every day!
1970 Roadster 1600/U20/5 sp. swap
1972 510 4 dr. vg30e/5 sp. ricky racer
1971 510 shell behind the shop, r.i.p.
I drive a Roadster or 510 almost every day!
-
- Roadsteraholic
- Posts: 511
- Joined: Sun Dec 09, 2007 5:58 pm
- Location: Los Angeles
Re: Watanabe Offset Identification Help
When the wheels are cast, the manufacturer does not necessarily know what the final offset will be, since the wheels can later be milled to different offsets. I spoke with the distributer of VTO a while back and he has "blanks" that can be drilled and offset to buyers specifications. I don't know if it was done the same back in the day, but I would imagine so.