U20 flywheel bolt Size

fj20spl311 · Post by **fj20spl311** » Mon Aug 17, 2020 11:03 pm

I need the flywheel bolt size for a U20
Thanks

JT68 · Post by **JT68** » Tue Aug 18, 2020 6:23 pm

Hi, They are M10x1.5. (We have them)

fj20spl311 · Post by **fj20spl311** » Thu Aug 20, 2020 10:47 pm

Thanks,
Phil

mraitch · Post by **mraitch** » Fri Aug 21, 2020 2:20 pm

I thought on the U20 they were ALLENS not BOLTS - at least BOTH the 5 spd trannies I had.

Mike Unger · Post by **Mike Unger** » Fri Aug 21, 2020 6:29 pm

mraitch wrote: Fri Aug 21, 2020 2:20 pm I thought on the U20 they were ALLENS not BOLTS - at least BOTH the 5 spd trannies I had.

Actually, yes they are Allen head machine screws as opposed to hex head machine screws if you want to get picky about names. Regardless, make sure you use high quality pieces if you don't have the factory ones as you don't want these to shear. That would not be good.

JT68 · Post by **JT68** » Fri Aug 21, 2020 11:24 pm

Right, once again chinese parts from Autozone would be a bad idea....
Blue loctite is a good idea..

fj20spl311 · Post by **fj20spl311** » Sat Aug 22, 2020 2:38 pm

I have the correct Allen head machine screws thanks to JT. Now to install his lighten flywheel to my "original" 67.5 motor in preparation to swapping back into my car. I use blue locktite.

Thanks again to JT

eastmedia · Post by **eastmedia** » Mon Mar 29, 2021 7:17 pm

Is the M10x1.5 just a U20? Manual lists M10x1.25? Is that R16?

Datsun Roadster Forum-311s.org

U20 flywheel bolt Size

U20 flywheel bolt Size

Re: U20 flywheel bolt Size

Re: U20 flywheel bolt Size

Re: U20 flywheel bolt Size

Re: U20 flywheel bolt Size

Re: U20 flywheel bolt Size

Re: U20 flywheel bolt Size

Re: U20 flywheel bolt Size