Datsun Roadster Forum-311s.org

Odd question,

Looking to replace my stock steering wheel with a wood rim. The part is in my restoration process I gave my steering wheel to a 311s.org member. Now I am at the point to buy a wheel but do not remember the size of stock one was. Also curios about the idea of going 1" smaller. Any one wish to add their input would be nice.

Thanks

I have a wood Momo wheel that is 370 mm. It was a big improvement in feel from the stock wheel which seemed too large for me.
There are some nice Momos at 330-360 mm. Ideal is to be able to try one out if you can. Ebay has a nice selection of wood wheels both new and old. Here’s one:
https://www.ebay.com/itm/MOMO-Steering- ... 5331d4a01f
Linda

Keep in mind, the smaller the wheel the harder the turning effort. If you are running close to stock tires then it may not be very noticeable, but if you have wide tires the low speed turning effort may be significant.

OEM steering wheel dimensions here:

viewtopic.php?f=2&t=16503&p=135103&hili ... on#p135103

Jon

15 5/8” =396.88 mm
Linda

Linda, Jon and Mike

Thank you for the information and your take on the steering wheel. Now I will start digging around

I appreciate

Trevor

Prior to Coronavirus, a car show with Italian and British cars was a great way to see old steering wheels and how they fit the car.
Otherwise if there are some you like, Alvin probably has some pics.
And just browsing Ebay for “auto wood steering wheels” should provide plenty of pics
Linda

Alvin always has pictures.

You could check the steering wheel kin a lot here https://www.woodensteeringwheels.com/ also, they make great steering wheel restoration.