Engine Had Developed a Chirp Today
Moderators: notoptoy, S Allen, Solex68
- theunz
- Roadster Nut-Site Supporter
- Posts: 2396
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
I have also had success on various components with a universal joint, better yet a swivel socket as they are more compact.
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
- bossbob
- Site Supporter
- Posts: 460
- Joined: Thu Aug 24, 2017 3:44 pm
- Location: Central Coast
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
I used a set of wrenches from home depot, extra long and thin walled. I was able to get in there and tighten the bolts. As others have said, carbs off and out of the way.
68 Roadster 1600
70 Boss 302
65 K-Code Fastback
69 Mach 1 393 Stroker 5 spd
63.5 Galaxy Conv. 427 Dual Carb, 4 spd
72 Ranchero
65 GT Coupe
70 Boss 302
65 K-Code Fastback
69 Mach 1 393 Stroker 5 spd
63.5 Galaxy Conv. 427 Dual Carb, 4 spd
72 Ranchero
65 GT Coupe
- redroadster
- Roadsteraholic
- Posts: 2405
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
Bellhousing bolts snug ?
Exhaust flexing ?
What others pointed out as well
Sure it not suspension related ?
Most of the chirps I chased were of the metal to metal. nature
Exhaust flexing ?
What others pointed out as well
Sure it not suspension related ?
Most of the chirps I chased were of the metal to metal. nature
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
- Copterpilot
- Site Supporter
- Posts: 549
- Joined: Tue Jun 05, 2012 1:50 pm
- Location: Woodville, OH
Re: Engine Had Developed a Chirp Today
I think (and hope) that I may have found the problem. The gasket from the header collector to the exhaust has broken apart and pieces have come off. After I change the gasket I'll know for sure. Anyone know where I can get a gasket quickly?
White 1968 2000 Roadster
Gray 2003 VW Jetta TDI
Red 2005 Pontiac Vibe
2112 Toyota Highlander
Platinum White F150 Platinum Powerstroke
AS365 Dauphine
A109E Power
Gray 2003 VW Jetta TDI
Red 2005 Pontiac Vibe
2112 Toyota Highlander
Platinum White F150 Platinum Powerstroke
AS365 Dauphine
A109E Power
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
Autozone.
They do disintegrate. Some use better gaskets that are more durable, Ebay for that
They do disintegrate. Some use better gaskets that are more durable, Ebay for that
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- Copterpilot
- Site Supporter
- Posts: 549
- Joined: Tue Jun 05, 2012 1:50 pm
- Location: Woodville, OH
Re: Engine Had Developed a Chirp Today
Found one at NAPA. Installed it last night. Will start it up this afternoon. Hopefully it will be very quiet.
White 1968 2000 Roadster
Gray 2003 VW Jetta TDI
Red 2005 Pontiac Vibe
2112 Toyota Highlander
Platinum White F150 Platinum Powerstroke
AS365 Dauphine
A109E Power
Gray 2003 VW Jetta TDI
Red 2005 Pontiac Vibe
2112 Toyota Highlander
Platinum White F150 Platinum Powerstroke
AS365 Dauphine
A109E Power
- Copterpilot
- Site Supporter
- Posts: 549
- Joined: Tue Jun 05, 2012 1:50 pm
- Location: Woodville, OH
Re: Engine Had Developed a Chirp Today
Got rid of most of the chirp by replacing the collector gasket. There's just a slight chirp until it warms up. Very happy that I didn't have to take the carbs and header off
White 1968 2000 Roadster
Gray 2003 VW Jetta TDI
Red 2005 Pontiac Vibe
2112 Toyota Highlander
Platinum White F150 Platinum Powerstroke
AS365 Dauphine
A109E Power
Gray 2003 VW Jetta TDI
Red 2005 Pontiac Vibe
2112 Toyota Highlander
Platinum White F150 Platinum Powerstroke
AS365 Dauphine
A109E Power
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
There are some really good collector gaskets and then the usual ones. So if it bugs you, you can try a thicker, better gasket to see how that works
New bolts to tighten it down help too, instead of the usual rusty ones.
Nice you didn’t have to do the exhaust header etc
Linda
New bolts to tighten it down help too, instead of the usual rusty ones.
Nice you didn’t have to do the exhaust header etc
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- spyder
- Roadster Fanatic-Site Supporter
- Posts: 2206
- Joined: Tue Apr 12, 2005 1:43 am
- Location: Live Oak, TX.
- Model: 2000
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
You can use what I installed years ago. Summit or Jegs has a soft aluminum gasket, lasts forever. If you remove it be sure to put it back the same way.
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
viewtopic.php?p=122588#p122588
https://www.summitracing.com/parts/MRG-7421G
Is the 3†size standard?
Linda
https://www.summitracing.com/parts/MRG-7421G
Is the 3†size standard?
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- spyder
- Roadster Fanatic-Site Supporter
- Posts: 2206
- Joined: Tue Apr 12, 2005 1:43 am
- Location: Live Oak, TX.
- Model: 2000
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
Nice catch, I looked and couldn't find the thread I knew was out there!
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine Had Developed a Chirp Today
I knew it was you who posted so I used your handle in the “Author“ box and then “ header gasket†, or something like that.Nice catch, I looked and couldn't find the thread I knew was out there!
Easy peasy
It’s only been 8 1/2 yrs
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.