SPLU311-02914 Interior Redo - Sort Of

Post by **Linda** » Fri Dec 18, 2020 1:23 am

Pics or it didnâ€™t happen.......

Linda

Curtis · Post by **Curtis** » Fri Jan 01, 2021 5:39 pm

Happy New Year to everyone.

I'm plodding along as time allows. Engine is mostly complete. A couple nights ago I put the rear side trim on. After inevitably dropping the tiny nut in to the crevice between the wheel well and outside and having to fish it out with a steak knife I put paper in the crack. I did the same on the front one and it managed to go back behind the paper. I had some on the bottom as well. Steak knife to the rescue or so I thought. It flipped out, went past the bottom paper and now resides under the rocker not to be extracted. And so much for the silicone grease trick. It did keep the washers on.

I bought a set of the stainless T bolts. There are 7 holes on each side in the stock quarter panels. Kit comes with 6 long per side which I did not notice until I went to put the other one on. Now I need two more. Apparently you're supposed to skip one of the holes. I have no idea why.

IMG_2922.JPG

IMG_2923.JPG

cbez · Post by **cbez** » Mon Jan 04, 2021 8:28 pm

Curtis · Post by **Curtis** » Fri Jan 08, 2021 9:56 pm

Spent the morning on wiring and the afternoon on the car. Starting putting on the rear carb and then stopped to wonder if I could get the steering tube in. Nope, had to take the carb off and stick it through the hole. Got them on after that.

After searching the Gates hose catalog I found two hoses that have 5/8" on one end and 1/2" on the other like stock. Got them and cut them down to size. Good fit.

IMG_2928.JPG

IMG_2929.JPG

IMG_2930.JPG

IMG_2931.JPG

Post by **S Allen** » Sat Jan 09, 2021 2:59 pm

Looks great Curtis.

Steve

devo · Post by **devo** » Sat Jan 09, 2021 4:16 pm

Curtis wrote: ↑Fri Jan 08, 2021 9:56 pm Spent the morning on wiring and the afternoon on the car. Starting putting on the rear carb and then stopped to wonder if I could get the steering tube in. Nope, had to take the carb off and stick it through the hole. Got them on after that.

After searching the Gates hose catalog I found two hoses that have 5/8" on one end and 1/2" on the other like stock. Got them and cut them down to size. Good fit.

IMG_2928.JPG

I used the 18051 for both connections. Didn't know about the 18485.

Curtis · Post by **Curtis** » Sat Jan 09, 2021 5:45 pm

The 18051 is 2 inches shorter the the original so it didn't seem like a fit to me so I didn't even try it.

Curtis · Post by **Curtis** » Sat Jan 09, 2021 9:24 pm

Ladies and Gentlemen, we have vinyl thanks in large part to my wife who spent a good portion of her Saturday doing the wheel wells for me.

I have now arrived back at the point where I started a year and a half ago when all I wanted to do was change the interior.

IMG_2933.JPG

theunz · Post by **theunz** » Sat Jan 09, 2021 11:33 pm

Looks nice and smooth Curtis, looks like you owe her one!

Curtis · Post by **Curtis** » Wed Jan 13, 2021 5:03 pm

Amazing but true, I managed to make a pattern and it fits perfectly. I was afraid I would screw it up and have to order some more vinyl.

triangle2.jpg

triangle1.jpg

DAC21 · Post by **DAC21** » Wed Jan 13, 2021 7:01 pm

Curtis wrote: ↑Wed Jan 13, 2021 5:03 pm Amazing but true, I managed to make a pattern and it fits perfectly. I was afraid I would screw it up and have to order some more vinyl.

triangle2.jpg

triangle1.jpg

Curtis, maybe you can make the wife into a money making operation helping us Roadster owners without a Seamstress in the house!

Post by **spl310** » Wed Jan 13, 2021 7:11 pm

What is that vinyl for?

Curtis · Post by **Curtis** » Wed Jan 13, 2021 7:29 pm

spl310 wrote: ↑Wed Jan 13, 2021 7:11 pm What is that vinyl for?

The triangle piece under the dash on each side.

Curtis · Post by **Curtis** » Wed Jan 13, 2021 7:31 pm

DAC21 wrote: ↑Wed Jan 13, 2021 7:01 pm
Curtis wrote: ↑Wed Jan 13, 2021 5:03 pm Amazing but true, I managed to make a pattern and it fits perfectly. I was afraid I would screw it up and have to order some more vinyl.

triangle2.jpg

triangle1.jpg
Curtis, maybe you can make the wife into a money making operation helping us Roadster owners without a Seamstress in the house!

Ya, not happening. Not a car girl as she said. I kind of had to beg. She is really good at sewing.

Post by **spl310** » Wed Jan 13, 2021 8:11 pm

Curtis wrote: ↑Wed Jan 13, 2021 7:29 pm
spl310 wrote: ↑Wed Jan 13, 2021 7:11 pm What is that vinyl for?
The triangle piece under the dash on each side.

That's what I thought, but what is the cut out for?

Datsun Roadster Forum-311s.org

SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of

Re: SPLU311-02914 Interior Redo - Sort Of