Page 1 of 1

Testing blower on a 1967

Posted: Tue Nov 12, 2019 12:25 pm
by joe fremeau
HI All , Recently I purchased a heater blower on line, it does not work when plugged into the wire from the heater core.Is there a way of attaching the blower wire to the positive side of the car battery to see if it turns Thanks

Re: Testing blower on a 1967

Posted: Tue Nov 12, 2019 1:07 pm
by greydog
Have you verified that the heater plug is getting power? It's possible that your switch is bad or you may have a broken wire or poor connection.
To answer your question; yes, you can run 12 v to the motor. If you haven't already, look in the WIKI for a wiring diagram for your car. Connect according to the diagram and it should turn.
Dan

Re: Testing blower on a 1967

Posted: Tue Nov 12, 2019 4:54 pm
by Curtis
Yup, 12v to the motor and ground to the case.

http://www.kendo-usa.org/datsun/datsun_ ... -Model.pdf