Page 1 of 1
Exterior Door Handle Disassembly
Posted: Fri Sep 06, 2019 5:31 pm
by Winnfield
I'm attempting to replace the weatherstripping on the exterior door handle - I've relieved the springs and it seems as if the hinge pins can be removed to separate the two parts enabling the new weatherstripping to attached without cutting the rubber. What's the magic trick to disassemble the handle?
IMG_20190904_073936.jpg
Re: Exterior Door Handle Disassembly
Posted: Sun Sep 08, 2019 10:43 pm
by gnoplos
I think you're gonna need to grind the rivets and re-rivet them.
Re: Exterior Door Handle Disassembly
Posted: Mon Sep 09, 2019 7:13 am
by dynaguy
I would razor blade slice the weatherstripping, then glue with super glue instead of messing with the integrity if the handle. There are o-ring making kits that use this process to make custom o-rings. Make sure you wipe any oil off the surface of the razor blade prior to making the cut. FWIW Pat