SPL310 - Alternate Master Cylinder Part Number Needed(PL411)

datsun65 · Post by **datsun65** » Mon Oct 31, 2005 7:15 pm

Folks,

Does anybody know the nissan part number for the PL411 Brake Master cylinder. This is the one that can be used on the SPL310 (but with the brake line on the opposite side).

Thanks,

Dan

datsun65 · Post by **datsun65** » Tue Nov 01, 2005 6:32 pm

From Phill Brook:

the part number for the PL410 is 46010-10600 but according to the parts
book it has the fluid pipe at the front of the cylinder.

46010 indicates a Brake Master Cylinder assembly for all models.

There are several different types of PL411. The part/model numbers are
as follows:
PL411-U = 170 or 187
PL411-UT = 171
PL411-UTK = 173
PL411UX = 250
PL411UTX = 253

You can try part number 46010-xxx00 where xxx = any of the 6 model
numbers above. I'd recommend trying 46010-17000 first.

Don't worry too much if the last 2 digits are different (they could
even be letters) as that is just a variation from the original. It could
mean a different supplier or an updated design or engineering spec.

Post by **spl310** » Tue Nov 01, 2005 8:07 pm

Thanks Dan, that is good info!!