FOUR fiddly parts that have to line up
Purchase 2 bolts (2 1/2 in or more) of same thread/pitch - M6-10 - cut down to 2" removing bolt head. Or, if you have metric dies, rod of similar diameter as bolt and thread it,
Screw into pump receptacle on two opposite sides - then slide pulley, spacer and finally fan.
Tie down with two of the bolts, unscrew guides and insert remaining bolts.
Makes alignment a snap.
Aligning Water pump, pulley, spacer and fan- Solution.
Moderators: notoptoy, S Allen, Solex68
-
mraitch
- Roadsteraholic
- Posts: 3629
- Joined: Mon Oct 02, 2006 7:03 pm
- Location: Lake Balboa (SFV) - CA
- Model: 1500/1600
- Year: High Windshield-68-70
- Contact:
Aligning Water pump, pulley, spacer and fan- Solution.
Peter Harrison
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California