Datsun Roadster Forum-311s.org

I know this is a lot to ask but I'm having problems getting my door locks to work properly can someone with a 67.5 post some photos of there linkage inside the door and a photo of eich lock from the outside? I think they might be installed on the wrong side and upside down?

There is a parts manual available online that has good illustrations on many things regarding the roadster. Here is the page which has the door lock setup and parts involved. Thought we had a link to it some where on the site. Guess I need to make it more visible.

Lock/Regulator


Steve

Some pics here
https://my-fairlady-kazu.com/2014/10/05/door-rods/

Thanks everyone

Non of those show me what i needed to know

same question,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
those link don't provide the answer
any one have a picture of the actual assembly as it should be installed ?

Here you go (from Project Unicorn) of the inside of a 67.5 door lock linkage as I took it apart:

spriso wrote: ↑Thu Feb 03, 2022 12:25 pm Here you go (from Project Unicorn) of the inside of a 67.5 door lock linkage as I took it apart:

Thanks much appreciated