keys cut from codes
Posted: Wed Aug 24, 2005 12:45 am
I had some keys cut from codes for a few sets of locks from http://keys4classics.com/
It took some back and forth figuring out the right blanks to use for the doors and trunk (reference blank is Taylor D79Y - 26mm from shoulder to tip), but the keys arrived today and they work great!
Had two keys cut for two sets, cost was around $37.
The easiest way to get the code is to look on the side of the trunk lock (inside the trunk), there is a 4-digit number there. If your locks are a matched set, the doors, gas cap and console lock will all be the same for high-window cars. Ignition key is different.
It took some back and forth figuring out the right blanks to use for the doors and trunk (reference blank is Taylor D79Y - 26mm from shoulder to tip), but the keys arrived today and they work great!
Had two keys cut for two sets, cost was around $37.
The easiest way to get the code is to look on the side of the trunk lock (inside the trunk), there is a 4-digit number there. If your locks are a matched set, the doors, gas cap and console lock will all be the same for high-window cars. Ignition key is different.