Page 89 of 99
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 13, 2019 4:31 pm
by Ralph
I have a set of Nissan aluminum wheels that came with the car ... Nissan part number 40300P7100. Will they fit? my '68?
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 13, 2019 10:10 pm
by theunz
tjp wrote: ↑Sat Apr 13, 2019 3:24 pm
What does a five speed transmission weigh?
Don't hold me to this, as my memory is none too good. That questions was asked a few years ago, and I weighed mine at the time at I believe 85lbs. If it's critically important you could search through my posts.
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Tue Apr 16, 2019 12:12 pm
by car_cursed
replacing my differential cover gasket this weekend, can anyone tell me the correct torque settings for the bolts?
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Wed Apr 17, 2019 7:47 am
by dynaguy
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Wed Apr 17, 2019 9:55 am
by car_cursed
I saw that and that, but a differential flange is not the same as the cover.
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Fri Apr 19, 2019 12:34 pm
by Lorna c
how many licks does it take to reach the tootsie roll center of a tootsie pop ?
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Fri Apr 19, 2019 12:35 pm
by Lorna c
sorry feeling sparky today
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Fri Apr 19, 2019 4:49 pm
by C.Costine
Lorna c wrote: ↑Fri Apr 19, 2019 12:34 pm
how many licks does it take to reach the tootsie roll center of a tootsie pop ?
It takes me about five........Then I bite it!
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 20, 2019 1:55 pm
by sdb8100
What is the torque specs for the nut on the bottom of 1) the steering gear box 2) the idler box??
I’ve found it called out in the past but I cannot find it!
Thanks
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 20, 2019 2:15 pm
by Lorna c
C.Costine wrote: ↑Fri Apr 19, 2019 4:49 pm
Lorna c wrote: ↑Fri Apr 19, 2019 12:34 pm
how many licks does it take to reach the tootsie roll center of a tootsie pop ?
It takes me about five........Then I bite it!
hahaha. nope 3 is the correct answer . one , two , three , at least that's what the owl says
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 20, 2019 2:30 pm
by pebbles
car_cursed wrote: ↑Tue Apr 16, 2019 12:12 pm
replacing my differential cover gasket this weekend, can anyone tell me the correct torque settings for the bolts?
Per the 2L wiki 12-18 ft lbs
http://www.311s.org/pmwiki-311/pmwiki.p ... ueSettings
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 20, 2019 2:32 pm
by pebbles
sdb8100 wrote: ↑Sat Apr 20, 2019 1:55 pm
What is the torque specs for the nut on the bottom of
1) the steering gear box 2) the idler box??
I’ve found it called out in the past but I cannot find it!
Thanks
Per the 2L wiki
Idler 65-79 ft lbs
Steering box 101 ft lbs
http://www.311s.org/pmwiki-311/pmwiki.p ... ueSettings
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Sat Apr 20, 2019 7:45 pm
by sdb8100
Thanks!
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Tue Apr 23, 2019 11:32 am
by 2mAn
where is the part number on the LSDs?
Re: The Quick/Small/(Stupid?) Question Thread-take 2
Posted: Wed Apr 24, 2019 12:31 pm
by 2mAn
2mAn wrote: ↑Tue Apr 23, 2019 11:32 am
where is the part number on the LSDs?
25th hour bump