67 Datsun 411 wagon
Moderators: notoptoy, S Allen, Solex68
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
67 Datsun 411 wagon
So I recently made a deal on a 67 Datsun 411 wagon. I will pick it up in a couple weeks. It is really straight and has no rust. The guy has a 66 411 sedan as well and if the guy who told him he would buy it doesn't show by the time I get there I am buying it as well! I have posted a couple pics of wagon. The sedan is extremely complete and very original (minus the front fenders) I have already found some fenders for the wagon. The plan is to put a KA24 and 5 speed in the wagon. Once I start the build I will update the progress.
You do not have the required permissions to view the files attached to this post.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
-
- Roadster Nut
- Posts: 72
- Joined: Sat Aug 29, 2015 11:48 am
Re: 67 Datsun 411 wagon
Good luck Brian!!
These cars are fantastic but you will find that finding parts is extremely difficult. I have a nice 66 411 sedan it's a stock J13 and I adore every one of its 67 horsepower.
These cars are fantastic but you will find that finding parts is extremely difficult. I have a nice 66 411 sedan it's a stock J13 and I adore every one of its 67 horsepower.
Brian
Berkeley, CA
1967 1600
1967.5 2000
1966 PL411
1967 Nissan Patrol
1970 240z
1972 240z
another 1972 240z
2013 Tacoma
Berkeley, CA
1967 1600
1967.5 2000
1966 PL411
1967 Nissan Patrol
1970 240z
1972 240z
another 1972 240z
2013 Tacoma
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8292
- Joined: Tue Jan 23, 2007 7:01 pm
Re: 67 Datsun 411 wagon
Cool car Brian. Are you sure you want to put a KA24 in it? It will be faster than your race roadster!
Here's a stroker going into a 411 at the shop:
Here's a stroker going into a 411 at the shop:
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
Yes Alvin I know it will be faster than the race car. I want a reliable driver that I can take the whole family on trips in. I am planning on putting vintage air in it as well so we can ride in comfort. As for the availability of part, thank goodness it is mostly complete and I will only pay through the nose to service the brake system.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
-
- Roadsteraholic
- Posts: 1863
- Joined: Wed Nov 19, 2003 11:55 pm
- Location: Texas
- Model: 2000
- Year: Low Windshield-64-67.5
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
[align=center]So I only planned on getting the wagon but the sedan was blocking it so I bought it too!! I drove to San Jose from the Reno area twice this past weekend to get them!! They were in a guys back yard and took a combined 7 hours just to get them out and loaded.
I will be selling the sedan as soon as I get a title in my name. The wagon will get restored but will have to wait until I finish a 67 1600 that I picked up a few months ago.[/align]
I will be selling the sedan as soon as I get a title in my name. The wagon will get restored but will have to wait until I finish a 67 1600 that I picked up a few months ago.[/align]
You do not have the required permissions to view the files attached to this post.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
- bakerjf
- Site Supporter
- Posts: 1384
- Joined: Wed Sep 07, 2011 5:48 pm
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: 67 Datsun 411 wagon
white, with red interior, 13" with whitewalls, 3.90 and a KA. i like it.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
Actually it will look more like this!pebbles wrote:white, with red interior, 13" with whitewalls, 3.90 and a KA. i like it.
You do not have the required permissions to view the files attached to this post.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
[align=center]So I got started on the project. I got it into the garage and started to pull parts off of it. I got all the lights and bumpers off and the hatch handle off so it is ready for body work and sheet metal repair. I bought a set of custom brackets from Mike on Ratsun to do a disc brake conversion on the front. It uses G20 calipers and rotors. He supplies all new mounting bolts, castle nuts ect to do the swap. All I had to do was get the calipers, rotors and brake lines with adapters. I will be using a 280zx brake master cylinder with this swap as well. I have all the parts but the rotors as they needed to have the hub opening widened. Everything should be here in the next week or so to finish the conversion.
I attached a picture of the aluminum brackets after I primed and painted with high temp paint. The KA24 is still pending shipping from Sacramento but should get here in the next couple weeks. I included a couple pictures of the front of it so you can see how much lower the Roadster spring is compared to a stock 411 one. I will be doing the other side when completing the brake conversion.[/align]
I attached a picture of the aluminum brackets after I primed and painted with high temp paint. The KA24 is still pending shipping from Sacramento but should get here in the next couple weeks. I included a couple pictures of the front of it so you can see how much lower the Roadster spring is compared to a stock 411 one. I will be doing the other side when completing the brake conversion.[/align]
You do not have the required permissions to view the files attached to this post.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
[align=center]So I finished pulling parts off and decided to start the rust repair. The only rust was in the rear bottom quarters. I cut it out and had to weld in the bottom structure first with some 16 g steel then I skinned it with some 24 g sheet metal. I finished the passengers side and got the bottom structure done on the drivers side. I then turned my attention to pulling the motor and trans as the KA24DE should be here soon. I spent some time cleaning the engine bay but it still needs a lot of work. I pulled the old carpets out and pulled all of the interior door panels. I should start the body work next weekend. Short of the rear quarters and hood there is very little to do so it should go fast.[/align]
You do not have the required permissions to view the files attached to this post.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
- CSP311
- Site Supporter
- Posts: 311
- Joined: Fri Jul 04, 2008 7:29 am
- Location: Uk
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
Good project, will be keeping an eye how you get on. I like these 411's too, espically as they yield a few parts that fit my CSP311! For me, parts are also available for the Bluebird series in the far east and Japan.
1965 Nissan Silvia (CSP311) for total restoration
1978 260Z finally on the road (Rebello 3.2L)
1978 260Z finally on the road (Rebello 3.2L)
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
[align=center]So I finally finished putting the front disc conversion on the 411. I didn't tighten everything down with locktite as I will take them apart one more time once the new ball joints and tie rods come in. While I was under the front I changed the stock sway bar bushings out for some new urethane ones.[/align]
You do not have the required permissions to view the files attached to this post.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
- spl310
- Roadster Guru
- Posts: 13215
- Joined: Sun Dec 29, 2002 10:38 pm
- Location: In front of this keyboard... in Jacksonville, Florida!
Re: 67 Datsun 411 wagon
Will that kit fit under 13" wheels? Will it work on an SPL310?
"Wow, a Roadster!" Stuart Little
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
- zippy67roadster
- Roadster Fanatic-Site Supporter
- Posts: 1396
- Joined: Tue Dec 08, 2009 4:43 pm
- Location: Cameron, Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: 67 Datsun 411 wagon
It will not fit under a 13 inch wheel but does fit under a stock 14 Roadster wheel. I would have to check with the guy who makes these to see if the hub diameter on a 1500 is the same as the 411. If it is then this kit should work.spl310 wrote:Will that kit fit under 13" wheels? Will it work on an SPL310?
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns